Toshiba e-studio 452 Printing Manual page 360

9 Monitoring Print Jobs
3
When the process is complete, the printers that have been found
are listed in the "Discovered Device" list.
If the process continues for a long time, it is because too many network clients are on the
network. Also, you must change the discover settings if you want to search for a printer
in the IPX/SPX network. In this case, you can configure the discovery settings using the
[Advanced] button.
P.363 "Configuring Network Discovery Settings"
4
Select the printers that you want to monitor from the "Discovered
Device" list and click [Add].
The selected printer is added to the "Monitoring Device" list.
You can remove the printers from the "Monitoring Device" list. To do this, select the
printer that you want to remove and click [Remove]. However, you cannot remove the
printers which are related to the installed printer drivers.
5
Click [OK].
360 Monitoring Print Jobs with TopAccessDocMon