Install The Log Assembly - Heatilator CNXT4236IT-C Owner's Manual

G. Install the Log Assembly
Log Set Assembly: LOGS-4236, LOGS-4842
Models: CNXT4236IT-C, CNXT4842IT-C,
CNXT4236IH-C, CNXT4842IH-C
CD4236IR-C, CD4842IR-C
CAUTION: Logs are fragile, handle with care.
Log A: SRV2208-702
Log B: SRV2208-703
Log C: SRV2208-704
Log D: SRV2208-073 (4236 models)
SRV2211-073 (4842 models)
A A
C C
Figure 1. Base Logs
REAR LOG REAR LOG
A A
BASE LOG BASE LOG
C C
Figure 2. Left Log and Right Log Reference Points
Figure 3. Left Log in Proper Position
Heatilator • CNXT4236IT-C, CNXT4842IT-C, CNXT4236IH-C, CNXT4842IH-C • 2208-900 Rev. M • 7/14
D D
B B
LEFT LOG LEFT LOG
D D
LOG A LOG A
SHOULD NOT SHOULD NOT
COVER ANY COVER ANY
PORTS PORTS
B B
FRONT FACE FRONT FACE
LOG PLACEMENT INSTRUCTIONS
1. Base logs have been permanently mounted on the
grate assembly. Do not attempt to remove or relocate
the logs. See Figure 1.
2. Be sure the left end of log A is not covering ports.
Slide the left end of log A back if it is covering any
ports. See Figure 2.
3. Left log placement (SRV2208-705) : Mate rear and front
faces of left log with indentations on rear and base logs
as shown in Figure 2 and Figure 3. Slide the left log
back.
4. Right log placement (SRV2208-706) : Place the right log
by positioning the front "V" of the log on the indentation
on the base log and resting the rear of the log on the
fl at area of the rear log. See Figure 2 and Figure 4.
5. Figure 4 shows the Left and Right Logs properly placed.
Both Left and Right Logs should sit securely on the rear
and corresponding base logs.
RIGHT LOG RIGHT LOG
REAR FACE REAR FACE
FRONT "V" FRONT "V"
Figure 4. Left and Right Log in Proper Position
FLAT FLAT
AREA AREA
REAR LOG REAR LOG
BASE LOG BASE LOG
59