Heatilator CNXT4236IT-C Owner's Manual page 69

B. Vent Components Diagrams (continued)
PVI-SLP
Power Vent Inline
12-1/2 IN.
(318 mm)
15 in.
(381 mm)
Figure 16.6 Vent Components
Heatilator • CNXT4236IT-C, CNXT4842IT-C, CNXT4236IH-C, CNXT4842IH-C • 2208-900 Rev. M • 7/14
13-5/8 IN.
346 mm
12-1/2 IN.
318 mm
20-3/4 IN.
527 mm
13-5/8 IN.
(346 mm)
SLP Low Profi le Cap
8-1/8 in. 13 in.
(206 mm) (330 mm)
Fire Risk.
• When using DVP-HRC-SS and DVP-HRC-ZC-
HORIZONTAL TERMINATION CAP
DESCRIPTION
10 ft. PV Wire Harness
20 ft. PV Wire Harness
40 ft. PV Wire Harness
60 ft. PV Wire Harness
80 ft. PV Wire Harness
100 ft. PV Wire Harness
Note: Wire harnesses required to power the PVI-SLP connect
to the appliance and are ordered separately from PVI-SLP.
Contact your dealer to order.
Note: Use only approved termination caps with the PVI-SLP.
See instructions included with PVI-SLP kit.
16 IN.
406 mm
4-1/2 IN.
114 mm
9-3/16 IN.
(233 mm)
16-11/16 IN.
424 mm
SLP-LPC
Effective Length
5-3/4 to 8-3/8 in. 5-1/2 in.
146 to 213 mm 140 mm
87°
WARNING
SS termination caps on top vented fi replaces, a
6 inch minimum vertical vent section is required
before installing fi rst elbow.
DVP-HRC-SS
DVP-HRC-ZC-SS
Optional Wire Harness
PART NUMBER
PVI-WH10
PVI-WH20
PVI-WH40
PVI-WH60
PVI-WH80
PVI-WH100
15 IN.
(381 mm)
16-11/16 IN.
(424 mm)
8-3/8 in.
213 mm
3°
10-1/2 in.
267 mm
10-7/8 in.
276 mm
69