Safety Precautions; Working In The Heating System; Installation Area / Boiler Room; Maintenance Intervals - Buderus 600 - 11S User Manual

Dear Customer,
Your Buderus 600 Series wall-mounted condensing gas
boiler has been designed and built in accordance with
state-of-the-art technological standards and the
recognised safety rules. Special focus has been placed
on operator convenience in this respect.
Carefully read the safety instructions and operating
manual to ensure safe, economic and ecologically
beneficial use of the unit.
Due to the high efficiency of the boiler a plume of water
vapour may form at the terminal during operation.
This is normal.
1

Safety precautions

DANGER!
A
If you smell gas:
1. No naked flames ! Do not smoke !
2. Avoid sparks !
Do not operate electrical switches.
Do not use the telephone, plug-in devices of
any kind or the doorbell!
3. Shut off the main gas supply!
4. Open windows and doors!
5. Warn building occupants and evacuate the
building!
6. Call TRANSCO (under 'GAS' in the telephone
directory) from outside the building!
NOTE
I
In the event of any other type of incident, shut off
the main gas supply and electric supply to the
appliance and seek assistance from a CORGI
registered engineer.
2 Installation area / boiler
room
DANGER!
A
The air intake and outlet openings must not be
reduced in size or closed.
DANGER!
A
Do not store or use inflammable materials or
liquids near the heating boiler.
NOTE
I
To prevent the boiler from being damaged, care
must be taken not to contaminate the
combustion air with halogenated hydrocarbons
(e. g. contained in aerosol sprays, solvents,
detergents, paints, and adhesives), or with high
quantities of dust. The room in which the boiler
is installed must be frost-proof and be well
ventilated.
Subject to modifications resulting from technical improvements!
Users manual for Buderus 600 - 11S / 19S / 24S / 24C • edition 02/2006
3 Working in the heating
system
DANGER !
A
Only a CORGI registered Engineer is to be
entrusted with the installation of this boiler, the
gas supply and the flue connection.
Commissioning, Servicing and any Repairs
must be carried out by a competent person i.e.:
a CORGI Registered Engineer.
All CORGI Registered Installers carry a CORGI
identification card and have a registration
number. Both should be recorded in your boiler
logbook. You can check your installer/Engineer
is registered by telephoning 01256 372300 or by
writing to:
CORGI, 1 Elmwood, Chineham Business Park,
Crockford Lane, Basingstoke. RG24 8WG
4 Functions of the system
and operating instructions
The installer should familiarize the user with the
functions and operation of the heating system and
ensure that a complete set of technical documentation is
supplied.
5

Maintenance intervals

For optimum, long-term reliable functioning of the
heating boiler, and in order to be able to claim under the
terms of the manufacturer's warranty, the heating boiler
must be inspected and maintained at least once a year
(under normal operating conditions) by an officially
recognized installation and service engineer. The term
"normal operating conditions" means that the heating
boiler is used to provide central heating and/or hot water
to no more than one single-family dwelling.
In all other cases, the heating boiler must be inspected
and maintained by an officially recognised installation
service engineer every 2,500 burner operating hours.
Buderus • http://www.buderus-domestic.co.uk
Users manual
3