Loading The Original Into The Adf - Olivetti d-COLOR MF652 User Manual

5

Loading the original into the ADF

The ADF feeds original sheets one by one in order from the top, and automatically loads them. For a 2-sided
original, the front and back sides are loaded simultaneously.
The ADF is helpful when loading a large number of original.
1
Widen the Lateral Guide.
2
Put the first page of an original at the top, and load the original
into the Original Tray with the required side facing upward.
% Load the original so that its top side is placed at the back.
When loading in a different orientation, be sure to specify
the loading direction of originals.
% For details on the loading direction of originals, refer to
[User's Guide: Copy Operations].
NOTICE
Do not load more than 150 sheets at a time into the Original
Tray, and do not load the sheets up to the point where the top
of the stack is higher than the , mark. Doing so may cause the
originals to jam, damage the originals and/or ADF failure.
However, if the original contains more than 150 pages, it can
be scanned separately.
3
Slide the Lateral Guide to fit the loaded original.
5-4
Loading the original into the ADF
d-Color MF752/652
5.1