Smdr Rs-232C Parameter [800]; Smdr Parameter [801]; Incoming/Outgoing Call Selection For Printing [802] - Panasonic KX-TEB308 Features Manual

SMDR RS-232C Parameter [800]

<Select the new line code>
8 0 0
<Select the word length>
NEXT SELECT STORE
(7/8 bits)
Notes
• * Select "None" when the printer does not require error checking.
• The following combinations are invalid.
If any of the above invalid combinations are selected, an alarm tone will be heard.
Feature & Programming References
1.20.1 Station Message Detail Recording (SMDR)

SMDR Parameter [801]

<Select the page length>
8 0 1
NEXT
<Select the skip perforation>
skip perforation
NEXT
(0 ... 95 lines)
Feature & Programming References
1.20.1 Station Message Detail Recording (SMDR)

Incoming/Outgoing Call Selection for Printing [802]

<Select an outgoing call>
8 0 2
NEXT SELECT STORE
(CR+LF/CR)
CR: Carriage Return
LF: Line Feed
<Select the parity bit>
NEXT SELECT STORE
(Mark/Space/
Even/Odd/
None*)
Parity
Mark
Space
Space
page length
(4 ... 99 lines)
STORE END
NEXT SELECT STORE
(On/Off/Toll)
<Select the baud rate>
NEXT SELECT
(1200/2400/
4800/9600 B)
<Select the stop bit length>
NEXT
(1 bit/2 bits)
Word length
8
8
8
STORE
<Select an incoming call>
NEXT SELECT
(On/Off)
3.3 PT Programming
STORE
SELECT STORE END
Stop bit length
STORE END
2
1
2
Feature Guide 243