Panasonic KX-TEB308 Features Manual page 145

[Explanation]
The following table explains the types of data logged by SMDR. The section numbers below refer to the
field indicated by the numbers above.
Section Number
(1) Date
(2) Time
(3) Ext. (Extension) Shows the number of the extension that was engaged in the
(4) CO
(5) Dial Number
Data
Shows the date (Month/Day/Year) of the call (
[000]). The date order varies depending on the user's country/
area.
Shows the start time of a call as hour/minute/AM or PM. Also
shows the following code:
*: Transferred call (
call.
Also shows the following code:
C-xx: Outside-to-Outside (CO-to-CO) line call via the DISA
feature (
(xx=Outside (CO) line number that receives the DISA call)
Shows the outside (CO) line number used for the call.
[Outside (CO) Line Call]
Outgoing Outside (CO) Line Call
Shows the dialled telephone number (max. 32 digits). Digits
shown are as follows:
0 through 9,
F/: Flash/recall signal (
=: Host PBX Access code marker (
Access Code (Access Code to the Telephone Company from
a Host PBX)) The marker is displayed between the Host PBX
Access code and the dialled number when a Host PBX Access
code is entered.
. (dot): Secret Dialling
Incoming Outside (CO) Line Call
Shows <incoming> + the caller's telephone number (max. 16
digits). A caller's telephone number is displayed only when an
optional Caller ID card is installed and "With CID" is selected
in Caller ID SMDR Format [906]. It is also possible to show a
caller's telephone number before the call is answered (
Caller ID SMDR Printout [907]).
Also shows the following codes:
<DISA incoming> + the caller's telephone number (max. 16
digits): Incoming outside (CO) line call via the DISA feature
<DIL incoming>: Incoming outside (CO) line call via the DIL
feature (
<UCD waiting>: Incoming outside (CO) line call via the UCD
feature (
When the UCD waiting call is answered, a new record is
started.
1.20 Administrative Information Output Features
Description
1.11.1 Call Transfer)
1.15.6 Direct Inward System Access (DISA))
, #, - (hyphen)
1.10.6 Flash/Recall)
1.1.1.1 Direct In Line (DIL))
1.2.2 Uniform Call Distribution (UCD))
Date & Time
1.5.2.7 Host PBX
Feature Guide 145