User Set Registers - Sony XCG-H280E Technical Manual

User Set Registers

User Set registers enable storing and confirming of settings by directing at UserSet0 to UserSet15.
The addresses of the User Set registers are configured as follows:
0xA000XYZZ
X: Indicates the category.
Y: Indicates the User Set number.
Y=0 means User Set 0, Y=1 means User Set 1, Y=A means User Set 10, and Y=F means User Set 15.
ZZ: Indicates the setting item.
ImageFormatControl (UserSet0 to UserSet15)
Address
0xA0005Y24 SensorTaps
0xA0005Y00 Width
0xA0005Y04 Height
0xA0005Y08 OffsetX
0xA0005Y0C OffsetY
0xA0005Y18 BinningHorizontal
0xA0005Y14 BinningVertical
0xA0005Y10 PixelFormat
1) Observe the following condition when setting:
Width + OffsetX
2) Observe the following condition when setting:
Height + OffsetY
AcquisitionControl (UserSet0 to UserSet15)
Address
0xA0006Y00 AcquisitionFrameRate
0xA0006Y04 AcquisitionFrameRateAuto
0xA0008Y44 TriggerMode
0xA0008Y98 TriggerSource
0xA0008Y50 TriggerInhibit
0xA0008YBC TriggerActivation
0xA0008Y54 TriggerShift
0xA0008Y58 TriggerDelay
0xA0008YB8 ExposureMode
0xA0008Y40 ExposureTime
0xA0009YB0 ExposureAuto
For More Information Please Call Aegis Electronic Group, Inc. * (888) 687-6877 Phone * aegis-g2@aegiselect.com * http://www.aegis-elec.com
Name Type
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
WidthMax
HeightMax
Name Type
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Data
2,4 Sets the number of Taps to be read from the image sensor.
WidthMin Sets the number of horizontal pixels (H).
-
1)
WidthMax
HeightMin - Sets the number of vertical lines (V).
2)
HeightMax
0 - Sets the offset of the number of horizontal pixels (H).
1)
WidthMax
0 - Sets the offset of the number of vertical lines (V).
2)
HeightMax
1,2 Sets Horizontal Binning.
1,2 Sets Vertical Binning.
0x01080001 Sets the pixel format.
0x010C0004
0x010C0006
0x01080009
0x010C0027
0x010C002B
Data
62500 - Sets the frame rate. [fps]
180000000
0, 1 Sets the auto frame rate.
0, 1 Sets the trigger.
0, 1 Sets the trigger source.
0, 1 Sets the trigger inhibit.
0, 1 Sets the trigger polarity.
0, 1 Sets the trigger shift.
0 - 4000000 Sets the trigger delay. [us]
0,1 Sets Exposure mode.
10 - 2000000 Sets the exposure time. [us]
0, 1, 2 Sets the auto exposure.
Description
Description
33