Sony XCG-H280E Technical Manual page 29

DigitallOControl
Address
0xA0000354 LineSelector
LineMode
0xA00020A8 LineInverter[Line1]
0xA00020AC LineInverter[Line2]
0xA0000400 bit0 LineStatus[Line5]
0xA0000400 bit1 LineStatus[Line6]
0xA000206C LineSource[Line1]
0xA0002080 LineSource[Line2]
LineFormat
0xA0000358 UserOutputSelector
0xA0002090 bit0 UserOutputValue[1]
0xA0002090 bit1 UserOutputValue[2]
0xA0002078 StrobeActiveTime[Line1]
0xA000208C StrobeActiveTime[Line2]
0xA0002074 StrobeActiveDelay[Line1]
0xA0002088 StrobeActiveDelay[Line2]
1) The settings of LineSelector, and UserOutputSelector are deleted and unsaved when the power is turned OFF.
For More Information Please Call Aegis Electronic Group, Inc. * (888) 687-6877 Phone * aegis-g2@aegiselect.com * http://www.aegis-elec.com
Name Type
1)
R/W
R/O
R/W
R/W
R/O
R/O
R/W
R/W
R/O
1)
R/W
R/W
R/W
R/W 1 - 4000
R/W 1 - 4000
R/W 0 - 4000
R/W 0 - 4000
Data
0 Selects GPO1 (Line1).
1 Selects GPO2 (Line2).
2 Selects GPI1 (Line5).
3 Selects GPI2 (Line6).
– Displays the input/output of GPI and GPO.
0 Sets GPO1 inversion to OFF.
1 Sets GPO1 inversion to ON.
0 Sets GPO2 inversion to OFF.
1 Sets GPO2 inversion to ON.
– Displays the GPI1 signal.
– Displays the GPI2 signal.
0 Selects the Exposure signal.
1 Selects the Strobe1 signal.
2 Selects UserOutput[1].
3 Selects UserOutput[2].
4 Selects the SensorReadOut signal.
5 Selects the TriggerSignal.
6 Selects True.
7 Selects False.
0 Selects the Exposure signal.
1 Selects the Strobe2 signal.
2 Selects UserOutput[1].
3 Selects UserOutput[2].
4 Selects the SensorReadOut signal.
5 Selects the TriggerSignal.
6 Selects True.
7 Selects False.
– Displays the signal format of GPI and GPO.
0 Selects UserOutput0.
1 Selects UserOutput1.
0 - 1 Specifies the User Output[1] signal.
0 - 1 Specifies the User Output[2] signal.
Specifies the pulse width of the Strobe1 signal. [us]
Specifies the pulse width of the Strobe2 signal. [us]
Specifies the delay of the Strobe1 signal. [us]
Specifies the delay of the Strobe2 signal. [us]
Description
29