Sony XCG-H280E Technical Manual page 35

DigitalIOControl (UserSet0 ~ UserSet15)
Address
0xA0008YA8 LineInverter[Line1]
0xA0008YAC LineInverter[Line2]
0xA0008Y6C LineSource[Line1]
0xA0008Y80 LineSource[Line2]
0xA0008Y90 UserOutputValue[1]
bit0
0xA0008Y90 UserOutputValue[2]
bit1
0xA0008Y78 StrobeActiveTime[Line1]
0xA0008Y8C StrobeActiveTime[Line2]
0xA0008Y74 StrobeActiveDelay[Line1]
0xA0008Y88 StrobeActiveDelay[Line2]
LUTControl (UserSet0 to UserSet15)
Address
0xA0008Y60 LUTEnable
0xA0008Y5C LUTFormat
0xA0008Y64 BinarizationThreshold
UserSetControl (UserSet0 to UserSet15)
Address
0xA0008YC0 UserMemoryValue
–
0xA0008YFC
For More Information Please Call Aegis Electronic Group, Inc. * (888) 687-6877 Phone * aegis-g2@aegiselect.com * http://www.aegis-elec.com
Name Type
R/W
R/W
R/W 0,1,2,3,4,5,
R/W 0,1,2,3,4,5,
R/W
R/W
R/W 1 - 4000
R/W 1 - 4000
R/W 0 - 4000
R/W 0 - 4000
Name Type
R/W
R/W
R/W 0 - 4095
Name Type
R/W
Data
0, 1 Sets GPO1 inversion.
0, 1 Sets GPO2 inversion.
Selects GPO1signal.
6,7
Selects GPO2 signal.
6,7
0, 1 Specifies the UserOutput[1] signal.
0, 1 Specifies the UserOutput[2] signal.
Specifies the pulse width of the Strobe1 signal. [us]
Specifies the pulse width of the Strobe2 signal. [us]
Specifies the delay of the Strobe1 signal. [us]
Specifies the delay of the Strobe2 signal. [us]
Data
0, 1 Enables/disables the LUT.
0 - 4 Sets LUTFormat.
Sets the threshold value for binalization.
Data
– Sets Value of UserMemory.
Description
Description
Description
35