Sony XCG-H280E Technical Manual page 26

Address
0xA0000224
0xA0000228
0xA0000300
0xA0000304
0xA00002F0
0xA00002F4
0xA0002044
0xA00002F8
0xA0002098
0xA0002050
0xA0002048
0xA00020BC
0xA0002054
For More Information Please Call Aegis Electronic Group, Inc. * (888) 687-6877 Phone * aegis-g2@aegiselect.com * http://www.aegis-elec.com
26
Name Type
AcquisitionFrameRateAuto R/W
AcquisitionFrameRateActu
al
2)
SpecialTriggerMode R/W
NumberOfMemoryForSpe R/W
cialTriggerMode
SpecialTriggerSource R/W
SpecialTriggerActivation R/W
TriggerSelector
TriggerMode R/W
TriggerSoftware W/O
TriggerSource R/W
TriggerInhibit R/W
TriggerActivation R/W
TriggerActivation R/W
TriggerOverlap
TriggerShift R/W
Data
0 Sets the auto frame rate to OFF.
1 Sets the auto frame rate to ON.
R/O – Displays the frame rate. [fps]
0 Sets the special trigger to OFF.
1 Sets the special trigger to bulk trigger mode.
2 Sets the special trigger to sequential trigger mode.
1 - 16 Sets the frame count of the special trigger.
0 Sets the trigger source for special trigger to Line3.
1 Sets the trigger source for special trigger to Line4.
2 Sets the trigger source for special trigger to Line3 or Line4.
3 Sets the trigger sources for special trigger to Line3 and Line4.
4 Sets the trigger source for special trigger to the software.
5 Sets the trigger source for special trigger to Line5.
6 Sets the trigger source for special trigger to Line6.
0 Sets the trigger of the special trigger to the edge of negative
polarity.
1 Sets the trigger of the special trigger to the edge of positive
polarity.
R/O – Displays the trigger type.
0 Sets the trigger to OFF.
1 Sets the trigger to ON.
1 Executes the software trigger.
0 Sets the trigger source to Line3.
1 Sets the trigger source to Line4.
2 Sets the trigger source to Line3 or Line4.
3 Sets the trigger sources to Line3 and Line4.
4 Sets the trigger source to the software.
5 Sets the trigger source to Line5.
6 Sets the trigger source to Line6.
0 Sets trigger inhibit to OFF.
1 Sets trigger inhibit to ON.
6 Sets the trigger to the edge of positive polarity.
4 Sets the trigger to the edge of negative polarity.
7 Sets the trigger to the level of positive polarity.
5 Sets the trigger to the level of negative polarity.
0 Sets the trigger to negative polarity.
1 Sets the trigger to positive polarity.
R/O 0 Indicates that trigger overlap is not allowed.
1 Indicates that trigger overlap is allowed during sensor reading.
0 Sets trigger shift to OFF.
1 Sets trigger shift to ON.
Description
1)