Center Mode - Yaesu FT dx 1200 Operating Manual

c
onvenience

CENTER mode

1. Switch operation mode to "CENTER mode".
See "Switching between CENTER/FIX Modes"
below for details on changing operating modes.
2. Press the [ SCOPE ] button momentarily to display
the scope screen.
 The current frequency is displayed in the center.
 Width of scope display can be set in the Menu
item "128 CENTER SPAN FREQ".
SCOPE
Current Frequency
1. Press the [ MENU ] button to enter the Menu
mode.
2. Rotate the [
VFO-B/CLAR
/ button) to select Menu item "124 SCOPE
MODE".
3. Press the [ SELECT ] button, then rotate the
[ ] knob (or press the / but-
VFO-B/CLAR
ton) to select the "CENTER" or "FIX" (Factory
default is "CENTER").
4. Press the [ SELECT ] button, then press the
[ MENU ] button to save the new setting and exit
to normal operation.
Page 40
f
eatures
Scope
Switching Between CENTER/FIX Modes
] knob (or press the
FIX mode
1. Switch the operation mode to "FIX mode".
See "Switching between CENTER/FIX Modes"
below for details on changing operating modes.
2. Press the [ SCOPE ] button momentarily to display
the scope.
 The frequency set in Menu Mode is displayed at
the leftmost start point on the screen.
 Width of scope display can be set in Menu Mode
by individual band (See below).
Receiving Frequency
SCOPE
Frequency set in Menu Mode
F
requency
1.8MHz 130 FIX 1.8MHz SPAN
3.5MHz 132 FIX 3.5MHz SPAN
5MHz 134 FIX 5.0MHz SPAN
7MHz 136 FIX 7.0MHz SPAN
10MHz 138 FIX 10MHz SPAN
14MHz 140 FIX 14MHz SPAN
18MHz 142 FIX 18MHz SPAN
21MHz 144 FIX 21MHz SPAN
24MHz 146 FIX 24MHz SPAN
28MHz 148 FIX 28MHz SPAN
50MHz 150 FIX 50MHz SPAN
[ SELECT ] button
[ MENU ] button
[ / ] button
 
FT 1200 O
DX
Sending Frequency
Example of display in split operation
M M
enu ode
[ CLEAR ] button
[ VFO-B/CLAR ] knob
M
peraTing anual