Yaesu FT dx 1200 Operating Manual page 50

i
nterference
μ-t F
une
 As you tune around on an amateur band with μ-Tune engaged, the microprocessor automatically commands the step-
per motor driving the toroid core to center the filter on the current operating frequency. However, you may use the
[ VFO-B/CLAR ] knob to skew the filter response to one side or the other of the operating frequency, to deal with
heavy interference on one side. To re-center the µ-Tune filter on the operating frequency, and eliminate any offset,
press the [ CLEAR ] button.
1. Press the [ MENU ] button to engage the Menu
mode.
2. Rotate the [ VFO-B/CLAR ] knob (or press the
 / button) to select Menu item "011 BAR
DISPLAY SELECT".
3. Press the [ SELECT ] button.
4. Rotate the [ VFO-B/CLAR ] knob (or press the
/ button) to select "µTUNE (µ-Tune)" (re-
placing the default "CW TUNE (CW TUNING)"
selection).
5. Press the [ SELECT ] button, then press the
[ MENU ] button to lock in the new setting and
exit to normal operation.
Page 48
r
ejection
( r
ilter equireS the optionAl
Changing the Tuning Offset Indicator
rF μ t k
uning
[ MENU ] Button
[ VFO-B/CLAR ] Knob
FT 1200 O
DX peraTing
)
it
M
anual