Center Mode - Yaesu FT DX 1200 Operation Manual

C
ONVENIENCE

CENTER mode

1. Switch operation mode to "C
See "Switching between C
below for details on changing operating modes.
ress the [ SCOPE ] button momentarily to display
.
the scope screen.
The current fre uency is displayed in the center.
Width of scope display can be set in the
item "128 CENTER SPAN FREQ".
Current Frequency
ress the [ MENU ] button to enter the
1.
mode.
otate the [
.
VFO-B/CLAR
button) to select
MODE".
ress the [ SELECT ] button, then rotate the
3.
[ ] knob or press the
VFO-B/CLAR
ton) to select the "C
default is "C T
ress the [ SELECT ] button, then press the
4.
[ MENU ] button to save the new setting and exit
to normal operation.
Page 40
F
EATURES
SCOPE
T mode".
T FI odes"
enu
Switching Between CENTER/FIX Modes
enu
] knob or press the
enu item "124 SCOPE
but-
T " or "FI " Factory
").
FIX mode
1. Switch the operation mode to "FI mode".
See "Switching between C
below for details on changing operating modes.
ress the [ SCOPE ] button momentarily to display
.
the scope.
The fre uency set in
the leftmost start point on the screen.
Width of scope display can be set in
by individual band See below).
Receiving Frequency
Frequency set in Menu Mode
F
REQUENCY
1.8MHz 130 FIX 1.8MHz SPAN
3.5MHz 132 FIX 3.5MHz SPAN
5MHz 134 FIX 5.0MHz SPAN
7MHz 136 FIX 7.0MHz SPAN
10MHz 138 FIX 10MHz SPAN
14MHz 140 FIX 14MHz SPAN
18MHz 142 FIX 18MHz SPAN
21MHz 144 FIX 21MHz SPAN
24MHz 146 FIX 24MHz SPAN
28MHz 148 FIX 28MHz SPAN
50MHz 150 FIX 50MHz SPAN
[ SELECT ] button
[ MENU ] button
[ / ] button
FT 1200 O
DX
T FI odes"
enu ode is displayed at
enu ode
Sending Frequency
Example of display in split operation
M M
ENU ODE
[ CLEAR ] button
[ VFO-B/CLAR ] knob
M
PERATING ANUAL