Yaesu FT dx 1200 Operating Manual page 43

The FT 1200 can memorize the scope screen in up to 10 channels, and recall it later.
DX
How to memorize
Press and hold the [ SELECT ] button for one sec-
ond to memorize the current scope screen. Up to 10
channels may be memorized. Once all 10 memories
have data in them, previous data (starting with chan-
nel "1") will be over-written, on a first-in, first-out
basis.
Recalling memorized screens
1. Press the [ SCOPE ] button several times until the
"Spectrum Scope Memory" screen appears.
The last stored scope screen memory will be dis-
played.
Press the [ SCOPE ] button to display the screens
in the following order:
[ Multi-Function ] screen à
à [ Spectrum scope ] screen à
à [ Full screen Spectrum scope ] screen à
à [ Spectrum scope+AF-FFT ] screen* à
à [ Spectrum scope Memory ] screen à
*: When the optional FFT unit is installed
2. Press the [  ] / [  ] / [  ] / [  ] buttons to recall the
memorized screen you wish.
[  ] / [  ] button: Recalls the memory towards
the new memory.
1 2 3
à à
[  ] / [  ] button: Recalls the memory towards
the old memory.
10 9 8
à à
3. To close the scope screen, press the [ SCOPE ]
button several times until the desired screen
appears.
FT 1200 O
DX peraTing
c
Scope
Memorizing the Scope Screen
4 ...... 9 2 ...
10 1
à à à à
7 ...... 2 9 ...
1 10
à à à à
M
anual
onvenience
[ SCOPE ] button
[///] Button
Erasing the memorized screens
1. Recall the scope screen that you wish to erase us-
ing the [  ] / [  ] / [  ] / [  ] button.
2. Press and hold one of the [  ] / [  ] / [  ] / [  ] but-
ton for one second to erase the scope screen.
The memory channel is deleted, and the channel
numbers, for channels with higher numbers, are
decremented.
f
eatures
[ SELECT ] button
Page 41