Nstalling Your New Recorder; Connections; Basic Connections - JVC HM-HDS1U Instructions Manual

8
EN

Connections

Matching Transformer
(not supplied)
ANTENNA IN
(Antenna or
S-VIDEO
cable input)
ANTENNA IN
IN OUT1
VHF/UHF
TV OUT
CABLE
BOX
TV OUT
(Antenna or
cable output)
S-Video Cable
(supplied)
RF Cable
(supplied)
NOTES:
For full identification of the recorder's rear panel, refer to the Index (REAR VIEW
TV equipped with Audio and Video Inputs is required to operate the recorder.
To make the most of the Super VHS picture performance we recommend that you use the supplied S-VIDEO cable to connect your
recorder to a TV with an S-VIDEO input connector.
To operate the recorder with your TV using the S-VIDEO connection, set your TV to the AV mode using the TV's remote control.
You can also use the TV/VCR button on the recorder's remote control to set your TV to the AV mode. (
Antenna or Cable
Coaxial Cable
Flat Feeder
AC Outlet
VIDEO AUDIO
OUT OUT OUT
S
IN
V
I
R L
D
E
OUT1
OUT2 O
R L
OUT2
VIDEO AUDIO
Back of
recorder
Audio/Video Cable
(supplied)
S-VIDEO IN
INSTALLING YOUR NEW RECORDER

Basic Connections

CHECK CONTENTS
1
Make sure the package contains all of the accessories
listed in "SPECIFICATIONS" (
SITUATE RECORDER
2
Place the recorder on a stable, horizontal surface.
CONNECT RECORDER TO
TV
3
The connection method you use depends on the type of
TV you have.
S-VIDEO Connection
CONNECT RECORDER TO
POWER SOURCE
4
Connect the AC power plug to an AC outlet.
FINAL PREPARATION FOR
TV
USE
5
Power on the recorder.
You can now perform simple playback (
the HDD deck, pg. 34 for the VHS deck) or simple
recording (
VHS deck).
a– Disconnect the TV antenna from the TV.
b– Connect the TV antenna cable to the ANT. IN jack
on the rear of the recorder.
c– Connect the supplied RF cable between the TV
OUT terminal on the rear of the recorder and the
TV's antenna input terminal.
d– Connect the supplied Audio/Video Cable between
the AUDIO OUT and VIDEO OUT jacks on the rear
of the recorder and the AV IN jacks on the TV. Set
your TV in video input mode or A/V input mode.
Refer to the TV Instruction Manual.
If you have a TV with S-VIDEO input terminals....
e– Connect the supplied S-Video cable between the S-
VIDEO OUT jack on the rear of the recorder and
the S-VIDEO IN jack on the TV.
The clock and tuner channels will automatically be
set when the antenna is connected and when the AC
is first connected to the recorder (
(If "Auto" or "CH" is displayed on the front display
panel before the recorder is powered on, the clock
and tuner channels are being set automatically. Wait
for the time to be displayed on the front display panel
before powering on the recorder.)
pg. 23 for the HDD deck, pg. 35 for the
pg. 91).
pg. 95).
pg. 9).
pg. 24 for
pg. 82)