Audio Dubbing (Vhs Deck Only) - JVC HM-HDS1U Instructions Manual

80
EN
Audio Dubbing
(VHS deck only)
yyy
POWER
yyy
yyy
HM-HDS1
Audio component
(CD player etc.)
DIGITPURE TECHNOLOGY
yy
yy yy
Audio cable
VHS Audio Dubbing
Audio dubbing replaces the normal audio sound of a previously
recorded tape with a new soundtrack. Use your recorder as the
recorder.
Normal audio track
Video/Hi-Fi audio
track
MAKE CONNECTIONS
1
Connect an audio component to the AUDIO IN L + R
connectors on the recorder´s front panel. *When
connecting monaural equipment, use only the
recorder´s AUDIO IN L connector.
SELECT VHS DECK
2
Press VHS (or S-VHS).
SET INPUT MODE
3
Press CH +/– to select depending on the connector
being used – "F-1" for the front panel input connectors,
or "L-1" for the rear panel input connectors.
LOCATE START POINT
4
Press PLAY to start playback of the tape in your
recorder, and press PAUSE when you find the point
where you want to start dubbing.
Press C.RESET to change the counter display to
"0:00:00".
ENGAGE AUDIO DUBBING
5
Press A. DUB.
Your recorder enters the Audio Dubbing Pause mode.
( blinks, and
panel.)
EDITING (cont.)
Pre-recorded tape
Audio-dubbed tape
light up on the front display