Layback Features For Hdd Deck; Live Memory Playback; Setting Time For Live Memory Playback; Start Live Memory Playback - JVC HM-HDS1U Instructions Manual

Hdd/vhs dual recorder
Hide thumbs Also See for HM-HDS1U:
Table of Contents

Advertisement

PLAYBACK FEATURES for HDD deck
Live Memory
Playback
Equipped with a hard disk drive, this recorder allows informa-
tion to be written to and read from the hard disk at high speeds.
Taking advantage of this feature, you can temporarily record
programs received with the tuner or from an externally-
connected equipment — CATV or DBS, and can watch them
only a few seconds behind actual air time.
In this recorder, viewing a program through HDD (not a
recorded program) means you are always watching the program
temporarily recorded on it.
This feature enables you to reverse the program back to view
any previous part of it — so called "Live Memory Playback",
which was impossible until now.
To access "Live Memory Playback", all that you have to do is to
turn on the recorder and select the HDD deck.
So, the temporary recording is started on the HDD deck.
And, you can select the length of the time for temporary
recording from off, 30 minutes, 1 hour, and 3 hours.
About "Live Memory Playback"
With a certain amount of space (for 30 minutes, 1 hour, and 3
hours) reserved on the hard disk, the recorder records broad-
casts being received or signals input from an externally
connected equipment.
Even while you are reversing the program to review any
previous part, the recorder continues recording the same
program or externally-input signals.
When the reserved amount of time (or space) runs out, the
recorder overwrites the previous recordings on the hard disk,
starting with the oldest one, repeatedly if necessary. After having
recorded a certain number of programs, if you try to increase
the amount of your reserved time on HDD, you may not be
allowed to do so because of possible lack of available space,
and the recorder will inform you of this by displaying a message
on the screen.
About limitation on Live Memory Playback
Recording to perform Live Memory playback, which means
the use of temporary recording on the hard disk, works for
signals from built-in tuners, external tuners and externally-
connected equipment. This feature also works for copy-
protected programs.
The temporary recording for Live Memory is canceled in the
following cases, and will start all over again when it is to
resume.
• When channels are changed
• When the power is turned off
• When the thumbnails are changed
• When the setting for Live Memory playback is changed
• When recording is started via the HDD deck or the VHS
deck
• When a recorded program is played back or deleted
Setting Time for

Live Memory Playback

ACCESS MAIN MENU
SCREEN
1
Press MENU.
● If you want to stop the following procedure on its
way, press MENU.
ACCESS HDD SET UP
SCREEN
2
1) Press @# (or 23) to
move the arrow to
"HDD/VHS SET UP",
then press fi (or ∞) or
OK.
2) Press @# (or 23) to
move the arrow to
"HDD SET UP", then
press fi (or ∞) or OK.
SELECT LIVE MEMORY
MODE
3
1) At the "LIVE
MEMORY", press OK.
2) Press %fi (or 5∞) to
select the desired
mode, then press OK.
a– Select "OFF" if you
do not want to use
the Live Memory
Playback.
b– Select "30 MIN." if you want to use the Live
Memory Playback for up to 30 minutes.
c– Select "1 HR." if you want to use the Live Memory
Playback for up to an hour.
d– Select "3 HR." if you want to use the Live Memory
Playback for up to 3 hours.
RETURN TO NORMAL
SCREEN
4
Press MENU.
Start Live Memory
Playback
You can start Live Memory Playback by pressing @ (or 2) or
1, then press PLAY. When you press @ (or 2) to start Live
Memory Playback, the recorder will rewind the pictures to the
point where Live Memory time counter shows "00" or "30" in
its minutes' place (or to the beginning of the program), then start
Live Memory Playback automatically.
You can use various playback features during Live Memory
Playback. (See pages 30 and 31.)
• To stop Live Memory Playback, press STOP. The on-air screen
resumes.
27
EN
HDD/VHS SET UP
FUNCTION SET UP
INITIAL SET UP
HDD SET UP
VHS SET UP 1
VHS SET UP 2
LIVE MEMORY
1 HR.
INDEX
MENU
SELECT WITH [∞523]
SELECT OK END
THEN PRESS [OK]
HDD/VHS SET UP
FUNCTION SET UP
INITIAL SET UP
HDD SET UP
VHS SET UP 1
VHS SET UP 2
LIVE MEMORY
1 HR.
OFF
30 MIN.
1 HR.
3 HR.
INDEX
MENU
SELECT WITH [∞523]
SELECT OK END
THEN PRESS [OK]

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents