Page 1: Table Of Contents
D-VHS DIGITAL RECORDER HM-DR10000EK CABLE /SAT LCD PROG AUDIO – –:– – TV/VCR ENTER/ENTREE 30 SEC 30 SEC . , ? VPS/PDC DAILY/QTDN. WEEKLY/HEBDO PQRS WXYZ MENU 0000 PROG NAVIGATION START STOP DATE PROG DEBUT EXPRESS POWER INSTRUCTIONS TIMER REC LINK DIGITAL TBC/NR...
Page 2: Safety First
In the unlikely event of the plug fuse failing be sure to replace the fuse only with an identical approved type, as originally fitted, and to replace the fuse cover. If the fuse fails again consult your nearest JVC dealer.
Page 3: Moisture Condensation
A blank black or blue screen appears. The picture is fuzzy. (VHS playback) Use a cleaning tape designed specifically for D-VHS video heads (JVC D-VHS video head cleaner DFC-2) to clean the video heads. In order to avoid misoperation, set "NAVIGATION" to "OFF" ( Follow the instructions that are provided with the cleaning tape.
Page 4: Some Do's And Don'ts
Some Do's And Don'ts On The Safe Use Of Equipment This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. read the operating instructions before you attempt to use the equipment.
Page 5: Quick Set Up Guide
QUICK SET UP GUIDE Dear Customer, Thank you for purchasing this JVC Video Cassette Recorder. Please use this QUICK SET UP GUIDE to help you to set up your video cassette recorder. CHECK THE CONTENTS CHECK ALL THE CONTENTS SHOWN BELOW...
Page 6: Installation
INSTALLATION CONNECT VIDEO RECORDER TO TV Place the recorder on a stable, flat surface. Back of TV Aerial connector 21-pin AV input connector (SCART) 21-pin SCART Cable (provided) Mains outlet Mains power inlet ATTENTION: You can not use the recorder connected to your TV only with the RF cable. This is because the RF cable does not deliver signal from the recorder.
Page 7 Back of TV AUDIO IN connectors S-VIDEO IN connector Aerial connector Mains outlet Mains power inlet Back of Recorder S-VIDEO CONNECTION To connect to a TV with S-VIDEO/AUDIO IN connectors . . . 1– Connect the aerial, recorder and TV as per "AV CONNEC- TION"...
Page 8: Auto Set Up
AUTO SET UP SET THE TUNER CHANNELS, CLOCK AND GUIDE PROGRAM NUMBERS The Auto Set Up function sets the tuner channels, clock and Guide Program numbers assigned by the VIDEO Plus+ system automati- cally the first time the button on the recorder or on the remote is pressed to turn on the recorder after the mains power cord has been plugged into a mains outlet.
Page 9: Preset Download
PRESET DOWNLOAD SET THE TUNER CHANNELS BY DOWNLOADING FROM YOUR TV, CLOCK AND GUIDE PROGRAM NUMBERS When you connect the recorder and your TV via fully-wired 21-pin SCART cable ( by downloading preset data from your TV instead of using the Auto Set Up function ( recorder sets the clock and Guide Program numbers assigned by the VIDEO Plus+ system automatically.
Page 10 If any of the above problems occur, refer to pages 60 – 62 to input station names ( stations ( "Delete A Channel"). You can also change station preset positions ( If you have any difficulty with the above procedures call the JVC Customer Service Hot Line on 0208 208 7654 QUICK SET UP GUIDE (cont.) ®...
Page 11: T-V Link Functions
For details, refer to the instruction manual for your TV. VCR Auto Standby You can use your TV's remote control to turn off the recorder. For details, refer to the instruction manual for your TV.
Page 12: Basic Operations
Press STOP. Then press EJECT to remove the cassette. INFORMATION When using the AV connection ( playback causes the VCR indicator to light and the TV to automatically enter AV mode. To return the TV to TV mode after playback is complete, press TV/VCR so that the VCR indicator turns off.
Page 13: Slow Motion
Still JOG dial NOTES: The operations using the JOG dial or SHUTTLE ring are not possible with cassttes recorded in D-VHS mode. Refer to the SHUTTLE ring illustration above as you read the following procedures. If the recorder is left in still or forward slow motion mode for over 5 minutes, it will automatically go into stop mode.
Page 14: Recording
Recording TV signals being received by the recorder’s built-in tuner can be recorded onto a video tape. You can “capture” a TV programme using your video recorder. Turn on the TV and select the AV mode. Insert a D-VHS cassette to record in the D-VHS mode. STD indicator LS3 indicator NUMBER...
Page 15: Recording Mode
INFORMATION When using the AV connection ( between TV mode and AV mode by pressing TV/VCR. * Depending on the type of TV used, TV/VCR button does not function as described above. Accidental erasure prevention To prevent accidental recording on a recorded cassette, remove its safety tab.
Page 16: Record One Programme While Watching Another
– –:– – Record One Programme While Watching Another Instant Timer Recording (ITR) This easy method allows you to record for any length of time from 30 mins. to 8 hours (selectable in 30-min. increments), and shuts off the recorder after recording is finished. TV PROG NOTE: You can only perform ITR using the RECORD button on the...
Page 17: Elapsed Recording Time
– –:– – – –:– – 0000 Elapsed Recording Time Indication You can check the exact time of a recording. SET COUNTER DISPLAY Press – –:– – (or DISPLAY) until a counter reading appears on the dispay panel. RESET COUNTER Press 0000 (or COUNTER RESET) before starting recording or playback.
Page 18: Video Plus+ Timer Programming
VIDEO Plus+ Timer Programming Before performing the VIDEO Plus+ Timer Programming: Make sure that the recorder's built-in clock is set properly. Insert a cassette with the safety tab in place. The recorder will come on automatically. Set the appropriate recording mode (D-VHS, S-VHS or VHS) ( pg.
Page 19: Pdc Recording
SET TAPE SPEED D-VHS mode: Press STD/LS3 ( ) to set the tape speed. S-VHS or VHS mode: Press SP/LP ( ) to set the tape speed. SET PDC MODE Press PDC to select "ON" or "OFF". If "VPS/PDC ON" is displayed on the screen or "VPS/ PDC"...
Page 20: Express Timer Programming
Express Timer Programming Before performing Express Timer Programming: Make sure that the recorder's built-in clock is set properly. Insert a cassette with the safety tab in place. The recorder will come on automatically. Set the appropriate recording mode (D-VHS, S-VHS or VHS) ( pg.
Page 21 ENTER PRESET POSITION Press TV PROG +/– to enter the preset position corresponding to the broadcasting station you wish to record. SET TAPE SPEED D-VHS mode: Press STD/LS3 ( ) to set the tape speed. S-VHS or VHS mode: Press SP/LP ( ) to set the tape speed.
Page 22 – –:– – Check, Cancel And Replace Programmes BASIC OPERATIONS (cont.) DISENGAGE TIMER MODE Press ‰ (or ‰TIMER), then press ACCESS PROGRAMME CHECK SCREEN/DISPLAY Press PR START STOP 8:00 10:00 10:00 10:45 11:30 13:00 ] : NEXT ACCESS PROGRAMME SCREEN/DISPLAY Press again to check more information.
Page 23 – –:– – START+/– To cancel or replace a programme... CANCEL OR REPLACE A PROGRAMME Press programme, press the appropriate button: START+/–, STOP+/–, DATE+/–, TV PROG+/–, STD/LS3 (SP/LP) RETURN TO NORMAL SCREEN/DISPLAY Press some programmes to be recorded, go on to step 6. STD/LS3 (SP/LP) RETURN TO TIMER MODE Press ‰...
Page 24: Video Navigation
Navigation Turn on the TV and select the AV mode. – –:– – NAVIGATION This function is useful when you wish to quickly find out what programmes you have recorded on a tape with this recorder. This function allows you to select a programme to watch, and then automatically searches for the start of the programme.
Page 25: Checking Memory
Checking Memory You can check the amount of recorded information in the memory. ACCESS MAIN MENU SCREEN Press MENU. ACCESS VIDEO NAVIGATION SCREEN Press % ﬁ to move the highlight bar (pointer) to "VIDEO NAVIGATION", then press OK or CHECK MEMORY Press % ﬁ...
Page 26: Title Editing
Title Editing When you record a TV programme with this recorder, the recorder automatically records the recording start time, date, and channel in each programme title. If the tape is recorded for the first time, the tape number and the date and time are recorded in the tape title.
Page 27 Press NUMBER key, then press to enter each character. Refer to the example below. (Ex.) Enter "JVC NEWS" Press 5 (JKL) once to enter "J", then press Press 8 (TUV) three times to enter "V", then press Press 2 (ABC) three times to enter "C", then press Press 0 ( ) twice to enter "...
Page 28: Delete Tape Data
– –:– – VIDEO NAVIGATION (cont.) Delete Tape Data Perform steps 1 to 4 of "Edit Tape Title" on page 26 before continuing. SELECT TAPE TITLE Press % ﬁ to move the highlight bar (pointer) to the tape number you want to delete, then press MENU DELETE TAPE DATA...
Page 29: Delete Programme Data
– –:– – MENU Delete Programme Data Perform steps 1 to 4 of "Edit Tape Title" on page 26 before continuing. SELECT PROGRAMME Press % ﬁ to move the highlight bar (pointer) to the programme you want to delete, then press DELETE PROGRAMME DATA Press % ﬁ...
Page 30: Sorting By Tape Number
– –:– – Sorting By Tape Number If you have recorded a lot of tapes with this recorder, this function is useful for finding out what is recorded on each tape. ACCESS MAIN MENU SCREEN Press MENU. ACCESS VIDEO NAVIGATION SCREEN Press % ﬁ...
Page 31: Sorting By Date
Sorting By Date If you have recorded a lot of tapes with this recorder, this function is useful for searching for tape numbers sorted by date. Perform steps 1 to 3 of "Sorting By Tape Number" on page 30 before continuing. ACCESS DATE SCREEN Press % ﬁ...
Page 32: Advanced Operations
Recording According To Tape Type Turn on the TV and select the AV mode. S-VHS (Super VHS) And VHS Your recorder can also record in either S-VHS or VHS. To record in S-VHS on a D-VHS cassette: Perform the steps 1 – 4 to set "S-VHS" to "AUTO". Then, insert a cassette marked "D-VHS"...
Page 33 – –:– – AUDIO ACCESS MAIN MENU SCREEN Press MENU. ACCESS MODE SET SCREEN Move the highlight bar (pointer) to "MODE SET" by pressing %ﬁ, then press OK or MENU SELECT S-VHS MODE Move the highlight (pointer) to "S-VHS" by pressing %ﬁ, then press OK or B.
Page 34: Playback/Recording According To Tape Characteristics
Playback/ Recording According To Tape Charac- teristics (S-VHS/ VHS Mode Only) Turn on the TV and select the AV mode. – –:– – PLAY RECORD , PLAY, RECORD, and PAUSE buttons on the recorder have the same function as those on the remote control.
Page 35: Start Recording
Recording START RECORDING Press and hold RECORD and press PLAY on the remote, or press RECORD on the recorder. DURING B.E.S.T. B.E.S.T. COMPLETE The recorder spends approximately 7 seconds assessing the condition of the tape, then begins recording. NOTES: The B.E.S.T. system works for both SP and LP modes only after a tape has been inserted and the Record mode is first initiated.
Page 36: Playback Picture Adjustment
Playback Picture Adjustment DIGITAL TBC/NR DIGITAL TBC/NR indicator MENU Manual Tracking Your video recorder is equipped with automatic tracking control. For most tapes this will automatically adjust the tracking to suit the particular tape you are playing. In some circumstances it may be necessary to make manual tracking adjustments.
Page 37: Looking For The Scene You Want
Looking For The Scene You Want – –:– – Index Search Your recorder automatically marks index codes at the beginning of each recording. This function gives you quick access to any one of 9 index codes in either direction. NOTE: Before starting, make sure the recorder is in the Stop mode.
Page 38: Selecting The Sound You Want
Selecting The Sound You Want – –:– – AUDIO ADVANCED OPERATIONS (cont.) Receiving NICAM Stereo And Bilingual Programmes Your recorder is equipped with a Digital stereo sound decoder (NICAM), making reception of stereo and bilingual broadcasts possible. When the recorder is tuned to a different station, the type of broadcast being received will be displayed on the TV screen for a few seconds.
Page 39 Soundtrack Selection (S-VHS/VHS Mode) Your video recorder is capable of recording three soundtracks (Hi-Fi L, Hi-Fi R and NORM) in the S-VHS/VHS mode and will play back the one you select. During Playback Pressing AUDIO on the remote control changes the soundtrack being played back as follows: TRACK Recorder's Front Panel On-Screen Display...
Page 40: Automatic Satellite Programme Recording
Timer mode, in Stop mode, recording or turned off. When the recorder is in Stop mode or recording, press TV/VCR on the remote control to turn off the VCR indicator on the display panel. In this case, be sure to set the AV1 OUT switch on the rear panel to COMP.
Page 41 REC LINK indicator ATTENTION Be sure not to turn on the satellite receiver before the programme is executed; otherwise, the recorder will start recording when the satellite receiver's power is turned on. If you have connected another appliance other than a satellite receiver to the AV2 IN/DECODER connector, be sure not to engage the Auto Satellite Prog Rec mode;...
Page 42: Remote Control Functions
NUMBER "1" ADVANCED OPERATIONS (cont.) Remote A/B Code Switching The remote control is capable of controlling two JVC video recorders independently; one set to respond to the remote control’s A code control signals and another set to respond to B code control signals.
Page 43 To return the remote to video recorder control, press VCR. IMPORTANT Although the provided remote control unit is compatible with JVC televisions, as well as many other models, it may not work with your TV, or in some instances, may have limited function capability. TV BRAND NAME...
Page 44 VCR. IMPORTANT Although the provided remote control unit is compatible with JVC satellite receivers, as well as many other models, it may not work with your satellite receiver, or in some instances, may have limited function capability. SATELLITE TUNER BRAND...
Page 45: Menu
Minimizing Picture Degradation While Editing (S-VHS/VHS Mode Only) Turn on the TV and select the AV mode. – –:– – Advantages Of S-VHS Video Recorders You can edit from VHS to S-VHS, S-VHS to VHS, or, from S-VHS to S-VHS. From VHS to S-VHS: Record VHS playback signals in the S-VHS mode.
Page 46: Edit From A Camcorder
When using a monaural camcorder, connect its AUDIO OUT connector to the AUDIO L input connector on your recorder. When a Master Edit Control-equipped JVC camcorder is used, the camcorder is capable of controlling the recorder. Refer to the camcorder’s instruction manual for operating procedure.
Page 47: Dv Sound Setting
R.PAUSE connector Mini-Plug Cable [5∞] = (not provided) [MENU] : EXIT (JVC camcorder only) When there are four DV audio channels (32kHz): SOUND1: Records the two channels (L/R) of DV SOUND2: Records the two channels (L/R) of DV FULL: When there are two DV audio channels (48kHz):...
Page 48: Edit To Or From Another Video
Edit To Or From Another Video Recorder – –:– – NUMBER "0" ADVANCED OPERATIONS (cont.) You can use your video recorder as the source player or as the recording deck. TV PROG MAKE CONNECTIONS Connect the player’s 21-pin SCART connector to the recorder’s 21-pin SCART connector as illustrated on page 49.
Page 49 TV Receiver (AV mode) Player 21-pin SCART Cable (not provided) Recorder TV Receiver Recorder (AV mode) S-Video Cable (provided) 21-pin SCART Cable (not provided) Another recorder Player NOTES: All necessary cables can be obtained from your dealer. For Y/C signal input/output, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal. When you select EDIT to dub tapes in step 4, be sure to select AUTO (or NORM when B.E.S.T.
Page 50: Av2 Select Setting
AV1 SELECT Setting Set "AV1 SELECT" to the appropriate mode depending on the type of unit connected to the rear panel AV1 IN/OUT connector of this recorder. Press MENU to access the Main Menu screen. Press %ﬁ to move the highlight bar (pointer) to "MODE SET", then press OK or Press %ﬁ...
Page 51: Synchro Editing
Synchro Editing (S-VHS/VHS Mode Only) NUMBER "0" Recorder SYNCHRO EDIT connector Player Camcorder To LANC connector The Synchro Editing function synchronizes the start of the playback and recording operations when starting an edit operation using a camcorder equipped with a LANC connector and your video recorder.
Page 52: Information On J Terminal
With the optional JLIP VIDEO CAPTURE BOX GV-CB3E: Allows you to capture still images from the recorder into a personal computer. For further details consult your nearest JVC dealer. JLIP ID Number Your recorder has its own JLIP ID number. This ID number must be unique when your recorder is connected to another device via its J terminal.
Page 53: Other Functions
Other Functions Turn on the TV and select the AV mode. – –:– – The superimposed indication on the TV screen tells you what the recorder is doing. PR. 12 ABCD 21 : 00 24. 12. 99 –1 : 23 : 45 NORM REMAIN 1 : 00 On-Screen Display...
Page 54: Power Save Mode
– –:– – ADVANCED OPERATIONS (cont.) Power Save Mode You can reduce the power consumption while the recorder is turned off. MENU NOTES: During Power Save, the display panel will be turned off. The Just Clock function ( Power Save mode is engaged. While the recorder is in the Power Save mode, the picture may be distorted momentarily when you turn on/off the recorder.
Page 55: Auto Sp Lp Timer
Auto SP LP Timer (S-VHS/VHS Mode Only) If, when timer-recording in SP mode, there is not enough tape to record the entire programme, the recorder automatically switches to LP mode to allow complete recording. For Example . . . Recording a programme of 210 minutes in length onto a 180- minute tape Approximately 150 minutes Approximately 60 minutes...
Page 56: Repeat Playback
– –:– – STOP ADVANCED OPERATIONS (cont.) Repeat Playback Your video recorder can automatically play back the whole tape 50 times repeatedly. PAUSE NOTES: Pressing PLAY, REW, FF or PAUSE also stops Repeat Playback. For a cassette recorded in D-VHS mode, Repeat Playback is possible only if the cassette was recorded in STD mode.
Page 57: System Connections
SYSTEM CONNECTIONS Connection To A Stereo System FM Tuner CD Player Stereo Amplifier Speaker Television Mains outlet Back of Recorder MAKE CONNECTIONS Connect the AUDIO OUT L and R connectors on your video recorder to the AUX IN or TAPE MONITOR terminals on your stereo system's receiver or amplifier.
Page 58: Subsidiary Settings
Tuner Set Turn on the TV and select the AV mode. – –:– – Your recorder needs to memorise all necessary stations in preset positions in order to record TV programmes. Auto Channel Set automatically assigns all receivable stations in your area to call them up by using the TV PROG buttons without going through any vacant channel.
Page 59: Video Plus+
– –:– – MENU VIEW CONFIRMATION SCREEN After "SCAN COMPLETED" is displayed on the screen for about 5 seconds, a Confirmation screen looking like the one on the right appears. The stations your recorder located appear on a Confirmation screen — preset positions (PR), channels (CH) and station names (ID –...
Page 60: Input Channel
– –:– – NUMBER Storing Channels Manually To store channels that were not stored during Auto Set Up pg. 8), Preset Download ( pg. 9) or Auto Channel Set pg. 58). ACCESS MAIN MENU Press MENU. ACCESS CONFIRMATION SCREEN Press %ﬁ to move the highlight bar (pointer) to “MANUAL CH SET”, then press OK or mation screen appears.
Page 61: Delete A Channel
Delete A Channel Perform steps 1 and 2 of "Storing Channels Manually" on page 60 to access the Confirmation screen before continuing. SELECT ITEM Press %ﬁ until the item you want to delete begins blinking. DELETE CHANNEL Press The item directly beneath the cancelled one moves up one line.
Page 62 When Receiving A Scrambled Broadcast SELECT DECODER MODE Set "AV2 SELECT" to "DECODER" ( ACCESS CONFIRMATION SCREEN Perform steps 1 and 2 of "Storing Channels Manually" on page 60. SELECT POSITION Press % ﬁ to select the channel position broadcast- ing scrambled programmes, then press OK twice.
Page 63: Tv Station And Id List
TV Station And ID List STATION NAME Anglia TV ANGL ARTE ARTE BBC Group BBC1 BBC1 BBC2 BBC2 Berlin 1 BLN1 Berlin 2 BLN2 Border TV BORD Bayern1 Bayern3 BRT1 BRT1 BRT2 BRT2 Children Ch CHLD Canal + Channel TV CHNL Central TV CNTR...
Page 64: Tv Station Channel Number Guide
TV Station Channel Number Guide Only the main stations are listed. There are in addition many relay stations, and full lists are available from the BBC and ITV. BBC1 BBC2 ITV London & South-East Bluebell Hill ... 40 Crystal Palace ... 26 Dover ...
Page 65: Setup
VIDEO Plus+ IMPORTANT Normally, Auto Set Up ( pg. 8), Preset Download ( automatically. You need to set the Guide Program Numbers manually only in the following cases. When timer-programming with the VIDEO Plus+ system, the preset position, where the station you wish to record is received on your recorder, is not selected or when you add a channel after Auto Set Up or Auto Channel Set has taken place.
Page 66: Clock Set
Clock Set Turn on the TV and select the AV mode. – –:– – Just Clock The Just Clock function provides accurate time keeping through automatic adjustments at regular intervals, by reading data from a PDC signal. The Just Clock option can be set "ON" or "OFF" at the Clock Set screen (the default setting is "ON").
Page 67 – –:– – MENU SET JUST CLOCK The default setting is “ON”. Set as desired by pressing %ﬁ, then press OK or #. For the Just clock function, If you set to “OFF”, you can disregard the next step as you won’t be able to receive regular clock adjustments.
Page 68: Subsidiary Information
Questions And Answers PLAYBACK Q. What happens if the end of the tape is reached during playback or search? A. The tape is automatically rewound to the beginning. Q. Can the video recorder indefinitely remain in the still mode? A. No. It stops automatically after 5 minutes to protect the heads.
Page 69: Troubleshooting
Check the cassette. CORRECTIVE ACTION Set the TV to its AV mode. Try manual tracking ( pg. 36). Consult your JVC dealer. Engage and adjust tracking manually pg. 36), or set the soundtrack to "NORM" ( pg. 39). CORRECTIVE ACTION...
Page 70: Timer Recording
TIMER RECORDING SYMPTOM 1. Timer recording won’t work. 2. Timer programming is not possible. 3. “‰“ and “]“ on the display panel won’t stop blinking. 4. The cassette is automatically ejected, and “‰“ and “]“ on the display panel won’t stop blinking. 5.
Page 71: Error Code
Error Code Some error codes may appear on the TV screen when operating the recorder. Refer to the chart below for the solution. ERROR CODE When a signal in which only the analog information is copy protected has been input for the dubbing in D-VHS mode.
Page 72: Index
Index FRONT VIEW S-VIDEO VIDEO (MONO)L AUDIO REMOTE 3 4 5 1 S-VIDEO Input Connector enables S-VIDEO connection to camcorder or second recorder; input recordable when "S-2" selected. pg. 46 2 Cassette Loading Slot is where cassette is inserted; door closes, "cassette loaded" indicator lights up on front display panel.
Page 73 INSIDE VIEW OF FRONT PANEL TIMER STANDBY/ON DISPLAY EJECT 1 STANDBY/ON Button turns recorder on/off (loading a cassette also turns power on). 2 ‰TIMER Button engages timer-standby mode. pg. 19, 21 3 DISPLAY Button switches display between clock time, tape remaining time, counter readings and preset position*.
Page 74: Rear View
(R)] from another recorder, camcorder or other source for editing. pg. 51 # Remote PAUSE Connector enables connection to JVC camcorder equipped with Master Edit Control, for easy editing. $ ANT. OUT Connector enables connection to aerial terminal of TV receiver.
Page 75: Display Panel
! PDC Indicator lights when PDC has been engaged for timer recording. * VPS (Video Programme System) recording is not currently @ VCR Indicator lights when the video recorder is in the video mode. At this point, the TV auto- matically enters AV mode.
Page 76 SUBSIDIARY INFORMATION (cont.) 1 LCD Panel indicates which of the recorder, TV 2 TV Button enables remote control of connected 3 VCR Button enables remote control of VCR or is 4 AUDIO Button changes output sound mode. TV/VCR 30 SEC...
Page 77 The remote control can operate most of your video recorder's functions, as well as basic functions of TV sets and satellite receivers of JVC and other brands. Point the remote control toward the sensor window. The maximum operating distance of the remote control is about 8 m.
Page 78: List Of Terms
A/B Code ... 42 Audio Rec Mode ... 39 Auto Set Up ... 8 Auto SP LP Timer ... 55 Auto Timer ... 55 Automatic Satellite Programme Recording ... 40 Aux Input ... 46 B.E.S.T. Picture System ... 34 Cancel Timer Programme ... 23 Change Station Channel Position ...
Page 79 MEMO...
Page 80: Specifications
GENERAL Power requirement : AC 220 – 240 V`, 50/60 Hz Power consumption Power on : 36 W Power off : 8.7 W Temperature Operating : 5°C to 40°C Storage : –20°C to 60°C Operating position : Horizontal only Dimensions (WxHxD) : 468 x 145 x 369 mm Weight : 8.0 kg...

JVC HM-DR10000EK Instructions Manual

Safety First

Quick Set up Guide

Installation

T-V Link

Basic Operations

Video Navigation

Advanced Operations

System Connections

Subsidiary Settings

Subsidiary Information

List of Terms

Specifications

Quick Links

Related Manuals for JVC HM-DR10000EK

Summary of Contents for JVC HM-DR10000EK

Table of Contents