Superimpose - JVC HM-HDS1U Instructions Manual

Superimpose

This function, switchable between ON and OFF, determines
whether or not operational indicators will appear on screen.
ACCESS MAIN MENU
SCREEN
1
Press MENU.
If you want to stop the following procedure on its
way, press MENU.
ACCESS FUNCTION
SCREEN
2
1) At the top of Main
Menu screen, move
the arrow to "FUNC-
TION SET UP" by
pressing @# (or 23),
then press fi (or ∞)
or OK.
2) On the Function Set
Up screen, move the
arrow to "FUNCTION" by pressing @# (or 23),
then press fi (or ∞) or OK.
SELECT SUPERIMPOSE
MODE
3
1) On the Function
screen, move the
arrow to "SUPERIM-
POSE" by pressing
%fi (or 5∞), then
press OK.
2) Press %fi (or 5∞) to
select the desired
mode, then press OK.
a– Select "ON" if you want the superimposed opera-
tional indications on the screen about 5 seconds
when operating the recorder.
b– Select "OFF" if you do not want the superimposed
operational indications on the screen.
RETURN TO NORMAL
SCREEN
4
Press MENU.
HDD/VHS SET UP FUNCTION SET UP INITIAL SET UP
FUNCTION VIDEO INPUTS
SUPERIMPOSE OFF
BLUE BACK ON
2ND AUDIO RECORD OFF
INDEX MENU
SELECT WITH [∞523]
THEN PRESS [OK]
SELECT OK END
HDD/VHS SET UP FUNCTION SET UP INITIAL SET UP
FUNCTION VIDEO INPUTS
SUPERIMPOSE OFF
OFF
BLUE BACK ON ON
2ND AUDIO RECORD OFF
INDEX MENU
SELECT WITH [∞523]
THEN PRESS [OK]
SELECT OK END
To recall an indication
1
Press OSD.
All indications corresponding to the current status are
displayed for 5 seconds. After that, the counter
information and RECORD/PAUSE if in the Record Pause
2
mode, are left displayed on the screen.
Press OSD again to clear the display.
The RECORD/PAUSE indication is left displayed on the
screen.
NOTES:
If you engage the Record Pause mode, RECORD/PAUSE is
displayed regardless of the Superimpose mode setting.
If you select a channel on which no signal is received, the
channel number is displayed regardless of the Superimpose
mode setting.
The superimposed indication on the TV screen tells you
what the recorder is doing.
1
2
CH 125
THU 12:00 AM
3
STEREO
SAP
4
VHS
5
+
B
NORM
6
HI–FI COUNT
1– Tuned-in channel or AUX(iliary) mode
When the channel is changed, the new channel is
displayed on the screen for 5 seconds.
2– Clock time
3– Stereo program indication
4– Second Audio Program indication
5– VHS indicator
6– Audio mode indications
7– "Cassette Loaded" mark
When a cassette is loaded, the mark is displayed for 5
seconds. It blinks when the recorder's EJECT button is
pushed.
8– Operation mode
When the operation mode is changed, the new mode is
displayed — RECORD (5 sec.), PLAY (5 sec.), FF/REW (5
sec. when engaged from Stop mode), RECORD PAUSE (for
as long as Pause is engaged), and ITR *:** (5 sec.).
9– Tape speed indication
10– Tape position indicator
11– INDEX indication
12– Counter reading
Switchable to the tape remaining time display
EN
7
RECORD
8
PAUSE
9
] SP
+ + 10
E
INDEX-1 11
12
–1:23:45
VHS
41