Basic Connections; Nstalling Your New Vcr - JVC HR-J4405UM Manual

4
EN

Basic Connections

Connect the power plug to an
AC outlet before installing the
lithium battery. (See below)
AC Outlet
AC Power Cord
Back of VCR
Back of VCR
CH3 CH4
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Be sure to connect the power plug to an AC outlet first
before installing the lithium battery; otherwise, the
battery's service life will be drastically shortened.
Downloaded from: https://www.usersmanualguide.com/
TV
VIDE
INSTALLING YOUR NEW VCR
Antenna or Cable
Flat Feeder
Matching Transformer
(not supplied)
Audio/Video Cable
(not supplied)
75 ohm terminal
300 ohm terminal
Installing/Removing the lithium battery
1
Make sure that the power plug is connected to an AC outlet
and turn off the VCR power.
2
Open the battery cover while pressing the release tab as
illustrated.
3
Insert a lithium battery with the plus (+) side up and push it
in.
To remove the lithium battery, press the latch A down-
●
ward using a pointed non-metallic object, then pull out
the lithium battery.
4
Close the battery cover until it clicks in place.
A
ANT. IN
(Antenna or Cable input)
Coaxial Cable
ANT. IN
OUT
AUDIO
RF OUT
VIDEO
CH3 CH4
RF Cable (supplied)
RF OUT