Variable Loading Floor In The Luggage Compartment - Skoda Roomster Owner's Manual

Hide thumbs Also See for Roomster:
Table of Contents

Advertisement

Attach the bag with the aid of the plastic carabines to the eyes on the left and
right luggage compartment trim panel.
Installing and removing the net partition behind the rear seats is carried out anal-
ogously as behind the rear seats. Use the lower fixing eyes on the carrier rails in
order to attach the carabines. To enlarge the luggage compartment, the rear
seats can be removed.
Installing and removing the net partition behind the rear seats with variable load-
ing floor
» page 58
is carried out analogously as behind the rear seats without
variable loading floor. To attach the carabines, use the lower eyes at the fixing
wedges on the front part of the variable loading floor.
The opening
» Fig. 46
in the net partition is designed to feed through the
D
three-point seat belt
» page
109, Seat belt for the rear middle seat.

Variable loading floor in the luggage compartment

Introductory information
The variable loading floor makes handling of bulky items of luggage easier.
CAUTION
The maximum permissible load of the variable loading floor is 75 kg.
Note
The room under the variable loading floor can be used to stow objects.
58
Using the system
Dividing the luggage compartment with variable loading floor
The luggage compartment can be divided with the variable loading floor.
Lift up the part with the holder and secure it by sliding it into the grooves
marked with the arrows
» Fig.
Removing the variable loading floor
Fig. 48 Fold up variable loading floor/remove
Removing the variable loading floor
Unhook the loops
» Fig. 48
A
Unlock the variable loading floor by turning the locking bolts
around 180°.
Fold up the variable loading floor by moving it in the direction of the arrow
Fold up the variable loading floor in the direction of the arrow
by pulling in the direction of the arrow
Installing the variable loading floor
Fold up the variable loading floor and place it on the carrier rails.
Fig. 47
Divide the luggage compartment
47.
of the elastic partition out of the fixing points.
to the left by
B
1
.
2
.
C
and remove
£

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents