Replacing the bulb for the low beam (Halogen projector
headlights)
ä
First read and observe the introductory information and safety warn-
ings
on page 172.
›
Remove the rubber cover
» Fig.
1
›
Turn the connector with the bulb in an anti-clockwise direction up to the stop
and remove
» Fig.
145.
›
Replace the lamp, insert the connector with the new bulb and turn in a clock-
wise direction to the the stop.
›
Insert the rubber cover.
Replacing the bulb for the main beam (Halogen projector
headlights)
ä
First read and observe the introductory information and safety warn-
ings
on page 172.
174
Do-it-yourself
Fig. 145
Removing the bulb for the low
beam
143.
Fig. 146
Removing the bulb for the main
beam
›
Remove the rubber cover
2
›
Turn the connector with the bulb in an anti-clockwise direction up to the stop
and remove
» Fig.
146.
›
Replace the lamp, insert the connector with the new bulb and turn in a clock-
wise direction to the the stop.
›
Insert the rubber cover.
Changing light bulb for turn signal light (at the front)
ä
First read and observe the introductory information and safety warn-
ings
on page 172.
›
Remove the socket
» Fig. 143
B
clockwise direction and remove along with the bulb for the turn signal light.
›
Replace the bulb, insert the socket with the new bulb and turn in a clockwise
direction up to the stop.
Changing the light bulb for the front parking light
ä
First read and observe the introductory information and safety warn-
ings
on page 172.
›
Remove the rubber cover
A
›
Grasp the lamp holder and remove it from the bulb housing.
›
Replace the light bulb and insert the lamp holder back into the headlamp with
the bulb.
›
Insert the rubber cover.
» Fig.
143.
or the socket
up to the stop in an anti-
3
» Fig. 143
and
.
2