Fog lights and daylight driving lights
Fig. 147 Front bumper: Protective grille/removing the fog light
ä
First read and observe the introductory information and safety warn-
ings
on page 172.
Bulb arrangement
» Fig.
147.
- Bulb for daylight driving light
A
- Light bulb for fog lights
B
Removing the cap
›
Grasp the protective grille in the areas marked by the arrows
remove the cover.
Replacing light bulbs for fog lights/daylight driving lights
›
Insert your hand into the opening in the protective grille and press the
catch
» Fig. 147
- in the direction of the arrow.
›
Remove the front fog lamp.
›
Turn the connector with the bulb in an anti-clockwise direction up to the stop
and remove.
›
Replace the lamp, insert the connector with the new bulb and turn in a clock-
wise direction to the the stop.
›
To re-install the fog light, first of all place the fog light with the lug on the side
opposite the license plate.
›
Press in the fog lamp on the side closest to the license plate.
›
Insert the cap, beginning with the lug on the side opposite the license plate.
›
Press in the cap on the side facing the license plate. The cap must engage firm-
ly.
Fog lights - Roomster Scout
» Fig. 147
- and
Fig. 149 Front bumper: Fog lights/fog lights: Replacing the light bulb
ä
First read and observe the introductory information and safety warn-
ings
Removing the cap and fog light
›
Guide the wire clamp
Vehicle tool kit and remove the cover.
›
Use the screwdriver
- .
›
Remove the front fog lamp.
Changing light bulbs and installing fog lights
›
Press the locking button
the socket
›
Turn the socket
and remove.
Fig. 148
Front bumper: Roomster Scout
on page 172.
» Fig. 148
into the opening above the fog light
» page
159, Vehicle tool kit to remove the screws
1
» Fig. 149
of the plug
.
B
with the bulb in an anti-clockwise direction up to the stop
B
» page
159,
» Fig. 149
A
and remove the plug from
£
175
Fuses and light bulbs