Brady BP-PR PLUS series Configuration Instructions page 25

Transfer printer
Hide thumbs Also See for BP-PR PLUS series:
Table of Contents

Advertisement

BP-PR PLUS series
Configuration
4.1.4
Interfaces
1. Press the menu button.
2. Select Setup > Interfaces.
Parameter
Default card
slot
Character set
RS232
RS-422/485
IEEE 1284
Ethernet
> DHCP
> IP
> Mask
> Gateway
> Network error
Edition 3/07
Meaning
Definition of the primary card slot. Select one of the card slots on the back
of the printer with CompactFlash or PC-Card or the card slot in the exter-
nal operating panel with Ext. CompactFlash.
Selection of the character set table for adaptation to the computer system
used.
Switching the character set via software is not possible. You can access
characters not available in the selected character set, however, using the
Unicode table.
Interface parameters Baud rate and Handshake for data transfer via the
serial RS-232 interface.
Configuration of the optional serial RS-422 or RS-485 interface. See docu-
mentation of the serial interface.
If interface is not installed, access only granted with service key
inserted!
Configuration of the optional parallel interface. See the documentation of
the parallel interface.
If interface is not installed, access only granted with service key
inserted!
Configuration parameters of the Ethernet interface card.
You can access additional configuration parameters for the Ethernet interface card via the
printer website (see "Setup tab" on Page 31).
Method of issuing IP address
On: Dynamic issuing of IP address by the DHCP server
Off: Direct issuing of the IP address by the operator
IP address of the printer. Only valid with DHCP = Off.
Subnet mask (classification and address range) of the local network. Only
valid with DHCP = Off.
Connection address between the local network and other networks. The IP
address of the computer (router) on the network through which the connec-
tion can be established is used for this. The address of the router can also
be issued via DHCP.
Printer switches to Error mode when problems with the network connection
occur.
Configuration Instructions
Default
Compact-
Flash
Windows
1252
57600
RTS/CTS
On
Off
Off
25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents