Service Key - Brady BP-PR PLUS series Configuration Instructions

BP-PR PLUS series
Offline menu
3.3

Service key

A service key is required for accessing special service functions not accessible to the operator. This key
switches the printer to service mode and enables:
•
Access to additional configuration parameters
•
Adjustment of the label sensor
•
Resetting of the service counter
•
Additional information in the status print and in the device list
•
Printout of an event list
•
Changing of the device name
•
Saving and loading of configuration settings
•
Access to PIN-protected configuration parameters and functions without entering the PIN
•
Access to configuration parameters for optional assemblies, even if they are not currently installed
Using the service key
CAUTION!
Incorrect settings and data loss via unauthorized access.
Access protection is deactivated when the service key is inserted. Operation of the printer by
unauthorized persons can lead to incorrect settings and data loss in this case.
⇒ Provide the service key to authorized persons only.
⇒ Remove service key after service work and store it in a secure location.
Fig. 6: Inserting the service key
Contact your dealer for information on how to obtain the service key.
Indication in this document
In this document, parameters and functions which are only accessible when the service key is inserted
are indicated using the following note:
Access only when service key is inserted!
20
⇒ Insert service key into a USB master interface on the back of
the printer.
You can also insert the service key while the device is switched
on.
Configuration Instructions Edition 3/07