Lancia Lybra Owner's Handbook Manual page 245

To extend the boot
1) Pull handle A (fig. 30) located in
the middle of each cushion and pull it
forwards in the direction of the arrow.
2) Remove the head restraints from
the rear seat (see "Head restraints")
and insert them in the housings on the
cushion (fig. 31).
3) Lift the handle by the sides of the
seat backs to release the seats:
B (fig. 32) = right-hand seat
C (fig. 33) = left-hand seat.
4) Lift the seat belts sideways and
tilt the seat back forwards as to ob-
tain a single load platform with the
floor of the boot.
fig. 30
244
To return the seats to their
normal position:
1) Move the seat belt sideways and
bring the seat back to an upright po-
sition. Check that it has caught prop-
erly.
2) Tip the cushion back and make
sure that the seat belt webbing is not
twisted in the hidden stretches be-
tween the cushions and the seat back.
3) Refit the head restraints.
4) Refit the passenger compartment
separation net (where fitted), the tilt-
ing oddment tray and the luggage
cover as shown in the specific para-
graphs.
fig. 31
IMPORTANT If there is a fairly
heavy load in the boot and you are
travelling at night, it is a good idea to
check and adjust the height of the
dipped beam headlights (see "Head-
lights").
fig. 32
fig. 33