If An Exterior Bulb Burns Out - Lancia Lybra Owner's Handbook Manual

IF AN EXTERIOR BULB BURNS OUT

The bulbs of (Xeno) gas-
discharge headlights must
be replaced by a Lancia
Dealership.
IMPORTANT For the type of bulb
to be used and the relevant power, see
the summary table at the previous
chapter "If a bulb needs replacing".
fig. 23
188
DIPPED AND MAIN BEAM
HEADLIGHTS, FRONT SIDE
LIGHTS
The dipped beam, main beam head-
lights and the front side lights are
housed in the front headlight cluster.
Press the upper tab A (fig. 23) and
remove the cover B. To refit the cover
B, insert tab C first then press on the
upper part of the cover to clip tab A
into place.
The bulbs are arranged as follows
(fig. 24):
1) Dipped beam headlight
fig. 24
2) Main beam headlight
3) Front side light
Dipped beam headlight (fig. 25)
To replace the halogen E, 12V- H7/
60W bulb:
1) Remove the connector from the
bulb.
2) Release the fastening clip A and
remove the bulb.
3) Insert the new bulb. Make the tab
B on the metal part of the bulb coin-
cide with the specific groove on the
headlight dish.
4) Refit the fastening clip and refit
the connector.
fig. 25