Subwoofer (50 Hz) - Yamaha AVENTAGE RX-A1040 Owner's Manual

Subwoofer
Selects whether or not a subwoofer is connected and its phase.
Settings
Select this option when a subwoofer is connected (phase not
Normal reversed). The subwoofer will produce LFE (low-frequency effect)
channel audio and low-frequency components from other channels.
Use
Select this option when a subwoofer is connected (phase reversed).
Reverse The subwoofer will produce LFE (low-frequency effect) channel audio
and low-frequency components from other channels.
Select this option when no subwoofer is connected. The front
None speakers will produce LFE (low-frequency effect) channel audio and
low-frequency components from other channels.
• When the bass sound is lacking or unclear, switch the subwoofer phase.
Layout
Selects a surround speaker layout when surround speakers are used.
Choices
Surround
Settings
Select this option when surround speakers are placed on the rear side
Rear
of the room.
Select this option when surround speakers are placed on the front
Front
side of the room. Virtual CINEMA FRONT (p.60) works in this case.
• This setting is not available when "Surround" is set to "None".
Bass Cross Over
Sets the lower limit of the low-frequency components that can be output from a
speaker whose size is set to "Small". A frequency sound lower than the specified
value will be produced from the subwoofer or front speakers.
Settings
40 Hz, 60 Hz, 80 Hz, 90 Hz, 100 Hz, 110 Hz, 120 Hz, 160 Hz, 200 Hz
• If the volume and crossover frequency are adjustable on your subwoofer, set the volume to half and
crossover frequency to maximum.
■
Distance
Sets the distance between each speaker and listening position so that sounds from the
speakers reach the listening position at the same time. First, select the unit of distance
from "Meter" or "Feet".
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R,
Front Presence L, Front Presence R, Subwoofer
Setting range
0.30 m to 3.00 m to 24.00 m (1.0 ft to 10.0 ft to 80.0 ft), *0.05 m (0.2 ft) increments
■
Level
Adjusts the volume of each speaker.
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R,
Front Presence L, Front Presence R, Subwoofer
Setting range
-10.0 dB to 0.0 dB to +10.0 dB (0.5 dB increments)
■
Parametric EQ
Adjusts the tone with an equalizer.
Settings
Select this option when you want to adjust the equalizer manually.
Manual
For details, see "Manual equalizer adjustment".
YPAO:Flat Adjusts individual speakers to achieve the same characteristics.
Adjusts individual speakers to achieve the same characteristics as
YPAO:Front
the front speakers.
YPAO:Natural Adjusts all speakers to achieve a natural sound.
Through Does not use the equalizer.
• "YPAO:Flat", "YPAO:Front", and "YPAO:Natural" are available only when the measurement results of "Auto
Setup" have already been saved (p.38). Press ENTER again to view the measurement results.
■
Manual equalizer adjustment
1
Set "Parametric EQ" to "Manual" and press ENTER.
2
Press ENTER again to enter the edit screen.
3
Use the cursor keys to select a speaker and press ENTER.
CONFIGURATIONS ➤ Configuring various functions (Setup menu)
113
En