Yamaha AVENTAGE RX-A1040 Owner's Manual page 103

■
Load
Loads the settings registered for the selected scene.
Select "DETAIL" to configure the SCENE link playback setting or view the scene
assignments.
Device Control
Recalls a selected scene and starts its playback on an external device connected
to the unit via HDMI. (SCENE link playback)
Settings
Off Disables the SCENE link playback function.
Enables SCENE link playback using HDMI Control signals. Select this
if an HDMI Control-compatible device (such as a BD/DVD player) is
HDMI Control
connected to the unit via HDMI. It also turns on the TV if it supports
HDMI Control.
Default
SCENE1 (BD/DVD), SCENE2 (TV): HDMI Control
SCENE3 (NET), SCENE4 (RADIO), SCENE5–12: Off
• To control playback of an HDMI Control-compatible device by SCENE link playback, you need to set
"HDMI Control" in the "Setup" menu to "On" and perform the HDMI Control link setup (p.147).
Detail
Selects items to be included as the scene assignments. You can also view the
settings currently assigned to the selected scene.
To include items as the scene assignments, use the cursor keys to select an item
and press ENTER to check the box (or uncheck the box to exclude).
For example, if you often adjust the volume while watching TV but listen to radio
with low volume at night, exclude "Volume" from the assignments for SCENE2 (TV)
and include "Volume" in the assignments for SCENE4 (RADIO).
Check or uncheck
Choices
Input Input (p.54), Audio Select (p.99)
HDMI Output HDMI Output (p.54)
Mode Sound Program (p.57), Pure Direct Mode (p.115), Enhancer (p.62)
Tone Control (p.97), YPAO Volume (p.97), Adaptive DRC (p.97),
Sound
Extra Bass (p.98)
CINEMA DSP 3D Mode (p.115), Dialogue Lift (p.98), Dialogue Level
Surround
(p.98), Subwoofer Trim (p.98), Extended Surround (p.116)
Video Video Mode (p.116)
Volume Master Volume (p.54)
Lipsync Lipsync (p.114), Delay (p.115)
Speaker Setup Setting Pattern (p.111), PEQ Select (p.113)
Default
Input, HDMI Output, Mode: selected
Sound, Surround, Video, Volume, Lipsync, Speaker Setup: not selected
CONFIGURATIONS ➤ Configuring the SCENE function (Scene menu)
103
En