Yamaha AVENTAGE RX-A1040 Owner's Manual page 50

1 2 3 4 5 6 7 8 9 10
AV AV
1 1 2 2 3 3 4 4
5 5 6 6 7 7 V-AUX V-AUX
AUDIO AUDIO
1 1 2 2 3 3 4 4
PHONO PHONO MULTI MULTI USB USB NET NET
TUNER TUNER
MAIN MAIN ZONE 2 ZONE 2 PARTY PARTY HDMI OUT HDMI OUT
SCENE SCENE
1 1 2 2 3 3 4 4
BD/DVD BD/DVD TV TV NET NET RADIO RADIO
PROGRAM PROGRAM MUTE MUTE VOLUME VOLUME
ON SCREEN
TOP MENU TOP MENU POP-UP/MENU POP-UP/MENU
ON
OPTION OPTION
SCREEN
Cursor keys
ENTER
ENTER
RETURN DISPLAY DISPLAY
BAND BAND
MODE MODE
TUNING TUNING PRESET PRESET
SUR. DECODE SUR. DECODE STRAIGHT STRAIGHT
MOVIE MOVIE MUSIC MUSIC
ENHANCER ENHANCER PURE DIRECT PURE DIRECT
INFO INFO SLEEP SLEEP
1 1 2 2 3 3 4 4
5 5 6 6 7 8 8
MEMORY MEMORY
9 9 0 0 ENT ENT
❑ Searching for an access point
If you select "Access Point Scan" as the connection method, the
unit starts searching for access points. After a while, the list of
available access points appears on the TV screen.
1
Use the cursor keys and ENTER to check the
desired access point and select "NEXT".
The wireless connection setting screen appears on the TV.
2
Use the cursor keys and ENTER to enter the
security key and select "NEXT".
3
Use the cursor keys (e/r) to select "CONNECT"
and press ENTER to start the connection process.
When the connection process finishes, "Completed"
appears on the TV screen.
If "Not connected" appears, repeat from Step 1 or try
another connection method.
4
To exit from the menu, press ON SCREEN.
❑ Setting up the wireless connection manually
If you select "Manual Setting" as the connection method, the
wireless connection setting screen appears on the TV.
You need to setup the SSID (network name), encryption method
and security key for your network.
1
Use the cursor keys and ENTER to enter the SSID of
the access point and select "NEXT".
2
Use the cursor keys (q/w) and ENTER to check the
security method of the access point and select
"NEXT".
Settings
None, WEP, WPA-PSK (TKIP), WPA-PSK (AES), WPA2-PSK (AES),
Mixed Mode
PREPARATIONS ➤ Connecting to a network device wirelessly
50
En