Yamaha AVENTAGE RX-A1040 Owner's Manual page 110

Menu Item
HDMI Control
HDMI Audio Output
Standby Through
Network Connection
IP Address
Network Network Standby
MAC Address Filter
Network Name
Main Zone Set Zone Rename
Volume
Max Volume
Initial Volume
Zone2 Set
Mono
Multi Zone
Zone Scene Rename
Zone Rename
Monitor Out Assign
HDMI OUT2 Assign
Party Mode Set
Input Assignment
Dimmer (Front Display)
Display Set Short Message
Wallpaper
Function
Trigger Mode
Trigger Output1
Trigger Output2
Target Zone
DC OUT Power Mode
Memory Guard
Auto Power Standby
ECO
ECO Mode
Language
Function
Enables/disables HDMI Control. You can also configure the relevant settings (such as ARC and TV audio input).
Selects a device to output audio.
Select whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode.
Selects the network connection method.
Configures the network parameters (such as IP address).
Selects whether to enable/disable the function that turns on the unit from other network devices.
Sets the MAC address filter to limit access to the unit from other network devices.
Edits the network name (the unit's name on the network) displayed on other network devices.
Changes the zone name (for main zone) displayed on the front display or TV screen.
Enables/disables volume adjustments for Zone2 output.
Sets the Zone2 maximum volume to prevent excessive loudness in the second zone.
Sets the Zone2 initial volume for when the unit is turned on.
Switches between stereo and monaural for Zone2 output.
Changes the scene names (for Zone2) displayed on the front display.
Changes the zone name (for Zone2) displayed on the front display or TV screen.
Select the zone for which the MONITOR OUT/ZONE OUT jacks are used.
Select the zone for which the HDMI OUT 2 (ZONE OUT) jack is used.
Enables/disables switching to the party mode.
Assigns the COMPONENT VIDEO, COAXIAL and OPTICAL jacks to another input source.
Adjusts the brightness of the front display.
Selects whether to display short messages on the TV screen when the unit is operated.
Selects the image to be used as wallpaper on the TV.
Specifies the condition for the TRIGGER OUT jack to function.
Specifies the zone with which the TRIGGER OUT jack functions are synchronized.
Selects how to supply power through the DC OUT jack.
Prevents accidental changes to the settings.
Sets the amount of time for the auto-standby function.
Enables/disables the eco mode (power saving mode).
Select an on-screen menu language.
CONFIGURATIONS ➤ Configuring various functions (Setup menu)
Page
117
118
118
119
119
119
119
120
121
121
121
121
122
122
122
122
122
122
123
123
123
123
124
124
124
125
125
126
126
110
En