Hdmi - Yamaha AVENTAGE RX-A1040 Owner's Manual

Aspect
Selects an aspect ratio to output HDMI video signals when "Video Mode" is set to
"Processing".
Settings
Through Does not convert the aspect ratio.
Outputs 4:3 video signals to a 16:9 TV with black bands on either side
16:9 Normal
of the screen.
• This setting functions only when 480i/576i or 480p/576p signals are converted into 720p, 1080i,
1080p, or 2160p (4K) signals.

HDMI

Configures the HDMI settings.
■
HDMI Control
Enables/disables HDMI Control (p.147).
Settings
Off Disables HDMI Control.
Enables HDMI Control.
On
Configure the settings in "TV Audio Input", "ARC" and "Standby
Sync".
• To use HDMI control, you need to perform the HDMI Control link setup (p.147) after connecting HDMI
Control-compatible devices.
TV Audio Input
Selects an audio input jack of the unit to be used for TV audio input when "HDMI
Control" is set to "On". The unit's input source automatically switches to TV audio
when the TV input is switched to its built-in tuner.
Settings
AUDIO 1–4
Default
AUDIO 1
• When using ARC to input TV audio to the unit, you cannot use the input jacks selected here for
connecting an external device because the input will be used for TV audio input.
CONFIGURATIONS ➤ Configuring various functions (Setup menu)
117
En