Yamaha AVENTAGE RX-A1040 Owner's Manual page 99

Hide thumbs Also See for AVENTAGE RX-A1040:
Table of Contents

Advertisement

Video Processing (Video Process.)
Enables/disables the video signal processing (resolution and aspect ratio) settings
configured in "Processing" (p.116) in the "Setup" menu.
Settings
Direct (Direct)
Disables the video signal processing.
Processing
Enables the video signal processing.
(Processing)
Input Settings (Input Settings)
Configures the input settings.
• This setting is applied separately to each input source.
Input Trim (In.Trim)
Corrects volume differences between input sources. If you are bothered by volume
differences when switching between input sources, use this function to correct it.
Setting range
-6.0 dB to 0.0 dB to +6.0 dB (0.5 dB increments)
Audio Select (A.Sel)
Selects the audio input jack to use when more than one audio connection is made
for one input source.
Settings
Automatically selects the audio input jack in the following priority order.
1. HDMI input
Auto (Auto)
2. Digital input (COAXIAL or OPTICAL)
3. Analog input (AUDIO)
Always selects HDMI input. No sounds are produced when no signals
HDMI (HDMI)
are input through the HDMI jack.
Always selects digital input (COAXIAL or OPTICAL). No sounds are
Coax/Opt
produced when no signals are input through the COAXIAL or
(Coax/Opt)
OPTICAL jack.
Always selects analog input (AUDIO). No sounds are produced when
Analog (Analog)
no signals are input through the AUDIO jacks.
Video Out (V.Out)
Selects a video to be output with the audio input source.
Settings
Off (Off)
AV 1–7 (AV1–7),
V-AUX (V-AUX)
Default
USB: V-AUX (V-AUX)
Others: Off (Off)
Audio Mode (Audio Mode)
(U.S.A. model only)
Switches between stereo and monaural for FM/AM radio reception.
• This setting is applied separately to each band (FM/AM).
Settings
Auto (Auto)
Mono (Mono)
• HD Radio programs are not available when the unit is in the monaural reception mode.
FM Mode (FM Mode)
(Except for U.S.A. model)
Switches between stereo and monaural for FM radio reception.
Settings
Stereo (Stereo)
Mono (Mono)
PLAYBACK ➤ Configuring playback settings for different playback sources (Option menu)
Does not output video.
Outputs video input through the corresponding video input jacks.
Receives the selected band (FM or AM) in stereo sounds when the
signal reception is good and in monaural sounds when it is not good.
Receives the selected band (FM or AM) in monaural sounds.
Receives FM radio in stereo sounds.
Receives FM radio in monaural sounds.
99
En

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents