Yamaha AVENTAGE RX-A1040 Owner's Manual page 49

1 2 3 4 5 6 7 8 9 10
AV AV
1 1 2 2 3 3 4 4
5 5 6 6 7 7 V-AUX V-AUX
AUDIO AUDIO
1 1 2 2 3 3 4 4
PHONO PHONO MULTI MULTI USB USB NET NET
TUNER TUNER
MAIN MAIN ZONE 2 ZONE 2 PARTY PARTY HDMI OUT HDMI OUT
SCENE SCENE
1 1 2 2 3 3 4 4
BD/DVD BD/DVD TV TV NET NET RADIO RADIO
PROGRAM PROGRAM MUTE MUTE VOLUME VOLUME
ON SCREEN
TOP MENU TOP MENU POP-UP/MENU POP-UP/MENU
ON
OPTION OPTION
SCREEN
Cursor keys
ENTER
ENTER
RETURN DISPLAY DISPLAY
BAND BAND
MODE MODE
TUNING TUNING PRESET PRESET
SUR. DECODE SUR. DECODE STRAIGHT STRAIGHT
MOVIE MOVIE MUSIC MUSIC
ENHANCER ENHANCER PURE DIRECT PURE DIRECT
INFO INFO SLEEP SLEEP
1 1 2 2 3 3 4 4
5 5 6 6 7 8 8
MEMORY MEMORY
9 9 0 0 ENT ENT
■
C: Using other connection methods
If your wireless router (access point) does not support WPS push
button configuration method, follow the procedure below to
configure the wireless network settings.
1
Press z (receiver power) to turn on the unit.
2
Turn on the TV and switch the TV input to display
video from the unit (HDMI OUT jack).
• Operations with TV screen are available only when your TV is connected to
the unit via HDMI.
3
Press ON SCREEN.
4
Use the cursor keys to select "Setup" and press
ENTER.
5
Use the cursor keys (e/r) to select "Network".
6
Use the cursor keys (q/w) to select "Network
Connection" and press ENTER.
7
Use the cursor keys (q/w) and ENTER to check
"Wireless (Wi-Fi)" and select "OK".
• The checkmark indicates the current setting.
8
Use the cursor keys (q/w) and ENTER to select the
desired connection method and select "NEXT".
The following connection methods are available.
You can set up a wireless connection with the
WPS Button WPS button while viewing the TV screen. Follow
the instructions displayed on the TV screen.
Share Wi-Fi
See "Sharing the iOS device setting" (p.47).
Settings (iOS)
You can set up a wireless connection by
Access Point searching for an access point. For details on
Scan settings, see "Searching for an access point"
(p.50).
You can setup a wireless connection by entering
the required information (such as SSID)
Manual Setting
manually. For details on settings, see "Setting up
the wireless connection manually" (p.50).
You can set up a wireless connection by entering
the unit's PIN code into the wireless router
(access point). The method is available if the
PIN Code
wireless router (access point) supports the WPS
PIN code method. For details on settings, see
"Using the PIN code" (p.51).
PREPARATIONS ➤ Connecting to a network device wirelessly
49
En