Disassembly
Removing the Transceiver Board
G
G
24
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and possible component damage.
1.
Remove the battery door, battery, SIM card, and back housing as described in
the procedures.
When removing or replacing the transceiver board, take care not to damage the
coaxial cable connected to the flip assembly.
2.
While holding the controller board immobile, carefully pull the transceiver
board straight away from the controller board to separate (see Figure 10A).
KEEP TOOL
PARALLEL TO PCB
Figure 10. Removing the Transceiver Board
TRANSCEIVER BOARD
A
COAXIAL
CABLE
COAX CONNECTOR
EXTRACTION TOOL
A009
B
PCB
INTERCONNECT
C
LOCKING
SPRING
SMT COAX
CONNECTOR
000910-A
6881037B20