Removing And Replacing The Transceiver Board Assembly - Motorola A780 Service Manual
Digital wireless telephone 850, 900, 1800, and 1900mhz
Hide thumbs
Also See for A780:
- User manual (183 pages) ,
- Owner's manual (182 pages) ,
- Manual to getting started (5 pages)
Table of Contents
Advertisement
Disassembly
Removing and Replacing the Transceiver Board Assembly
20
G
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and component damage.
1.
Remove the battery cover, battery, SIM card, stylus, and rear housing as
described in the procedures
G
The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when
handling.
2.
Carefully work the flat end of the disassembly tool under the flex connector
and remove the connector from the transceiver board. See Figure 6.
Flex Connector
Figure 6. Disconnecting the Flex from the Transceiver Board
.
September 20, 2004
A780
6809488A90
Advertisement
Table of Contents
Troubleshooting
