Removing And Replacing The Transceiver Board Assembly - Motorola V180 Service Manual

Disassembly

Removing and Replacing the Transceiver Board Assembly

G
G
26
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and component damage.
1. Remove the battery cover, battery, SIM, antenna, rear housing and battery
tray as described in the procedures
The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when
handling.
2. Carefully work the flat end of the disassembly tool under the flex connector
and remove the connector from the transceiver board. See Figure 7.
Flex Connector
Figure 7. Disconnecting the flex from the transceiver board
July 08, 2004
.
Disassembly tool
V180
040243o
6809485A79-O