Level 1 and 2 Service Manual
Removing and Replacing the Transceiver Board
G
6881040B65
1.
Remove the rear housing cover, SIM, endo assembly, antenna, front endo
housing, display assembly and battery, as described in the procedures.
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and component damage.
2.
Use the disassembly tool to release the display assembly latches that secure
the display assembly to the transceiver board.
3.
Lift the transceiver board away from the display assembly as shown in Figure
12.
TRANSCEIVER BOARD
DISASSEMBLY TOOL
TRANSCEIVER BOARD
Figure 12. Removing the Transceiver Board
4.
To replace, align the transceiver board with the display assembly.
5.
Carefully lower the transceiver board onto the front housing.
6.
Secure the 4 display assembly latches to the transceiver board.
August 20, 2002
DISPLAY ASSEMBLY LATCHES
DISPLAY ASSEMBLY
Disassembly
020208o
29