About Tv Aspect Ratio - Pace TDC779X Service And Installation Manual

About the TV Aspect Ratio
The TV that you have connected to the set-top has an aspect ratio (width-to-height ratio) of 4:3
(basic/standard) or 16:9 (widescreen). You must set the appropriate TV Aspect Ratio (4:3 or 16:9) on
the set-top, so that it is compatible with the TV.
Setting the TV Aspect Ratio
If you have not done so, put the set-top into "user settings mode", as described on page 42.
Press the U or D button until the front panel shows "ASPt".
The flow diagram on the far right shows how you use the arrow and select buttons on the set-
top's front panel to change the display and make the settings. See also the instructions below.
To change the TV Aspect Ratio, press the R button.
1.
The current TV Aspect Ratio setting ("43" or "169") appears on the front
panel. You may also see the menu, shown right, on the TV screen.
Press the U or D button until the TV Aspect Ratio you want appears on the
2.
front panel.
Press the select button to confirm the choice and change to that TV
3.
Aspect Ratio.
Press the L button. The front panel will display "ASPt" again.
4.
5. To continue making the settings, see the next section.
MAKING USER SETTINGS (cont.)
TV Aspect Ratio
4:3
16:9
4:3 standard TV,
EDTV or HDTV
16:9 HDTV