About The Tv Aspect Ratio - Pace DC700X Service And Installation Manual

MAKING USER SETTINGS (cont.)

About the TV Aspect Ratio

The TV that you have connected to the set-top has an aspect ratio (width-to-height ratio) of 4:3
(basic/standard) or 16:9 (widescreen).You must set the appropriate TV Aspect Ratio (4:3 or 16:9) on
the set-top, so that it is compatible with the TV.
Setting the TV Aspect Ratio
If you have not done so, put the set-top into "user settings mode", as described on page 41.
Press the U or D button on the remote control until you highlight TV Aspect Ratio in the PACE
USER SETTNGS menu.
1. To change the TV Aspect Ratio, press the R button.
The TV Aspect Ratio menu, shown right, appears on the TV screen. In the menu, the current
setting ("4:3" or "16:9") has > in front of it. Also, whenever the current setting is highlighted, the
MESSAGE light will be lighted on the set-top's front panel.
2. Press the U or D button to highlight the TV Aspect Ratio you want.
3. Press the SELECT button to confirm your choice and change to that TV Aspect Ratio.
4. Press the L button. The PACE USER SETTNGS menu reappears.
To continue making the settings, see the next section.
42
4:3 standard TV,
EDTV or HDTV
16:9 HDTV
TV Aspect Ratio
4:3
>16:9