Table of Contents
Advertisement
Check
Can you display menus
and guides on the
NO
screen?
YES
D
Is there any sound?
NO
YES
D
Can you hear stereo
sound?
NO
YES
D
Please see the next page
Suggested solution
If the TV is connected to the VIDEO OUT or
S-VIDEO jacks, then you will see menus and
R
guides only if the screen resolution 480i is
set to "Yes" and 480p, 720p and 1080i are
set to "No".
Check that the audio cables are securely and
correctly connected.
R
First check that the program is likely to have
stereo sound (an old movie, for example, may
R
not be in stereo).
Check the Audio settings on the TV Guide
Setup Menu (see page 55). The Stereo Output
may be set to "Mono". Change it to "Stereo".
SOLVING PROBLEMS (cont.)
Further checks, if there is still a problem
Use the front panel to check the user settings (see page
42) and change the TV Display Capability resolution
settings if necessary (see page 44).
Check that you have not muted the sound on the set-
top and/or TV. Adjust the volume control on the set-top
and/or TV. If you are using a home theater, check it is set
up correctly.
If the TV is mono, you will only hear stereo sound if you
have a stereo audio amplifier and speakers or home
theater connected to the stereo VCR or set-top. This is
also the case if the stereo TV has only an RF input.
Hide quick links:
Advertisement
Table of Contents
