Operating The Set-Top; Turning The Set-Top On And Off - Pace TDC779X Service And Installation Manual

OPERATING THE SET-TOP

Turning the set-top on and off

After you have connected the set-top to the AC wall outlet (and switched this outlet ON, if it has a
switch), the light next to the power button on the set-top's front panel should be red.
Wait until you can see the time on the front-panel display, then press the button labeled power on
the front panel of the set-top to turn it on. The light next to the power button goes from red to
blue, to show that the set-top is on.
If the light next to the power button is neither red nor blue, there is a problem.
To turn the set-top on or off at any time, press the power button on its front panel or the
POWER button on the remote control (first making sure the remote control is set to control the
set-top).
Never turn off the set-top by simply disconnecting it from the power supply. If you need to
disconnect the set-top, first stop any recording. Then turn off the set-top by pressing the power
button on its front panel or on the remote control, so that the light by the power button goes red.
Then wait 60 seconds before disconnecting the set-top at the wall AC outlet.
It is important that, unless there is a lightning storm or the set-top's users are away from their home for a
long time, they do not unplug the set-top at the wall AC outlet (or do not switch it off there, if the outlet
has a switch). The set-top cannot be updated with new features, through the cable, if it is disconnected
from the AC power supply.
Depending on the set-top's settings, if you switch the set-top off, any TV that is attached to the set-top's
POWER OUTLET may also turn off. For more details, see page 55.

NOTES
To turn on the set-top,
press the power button.
The light next to the
button changes from
red to blue.
Front panel display, showing
the time