Connecting The Power Supply Unit To Your Set-Top Box; Connecting Equipment To The Wall Ac Outlets; Turning Your Set-Top Box On And Off; Lightning Storms - Pace CI2516 User Manual

CONNECTING THE EQUIPMENT (cont.)
Do not connect your set-top box (or any other equipment such as a TV or VCR) to the power supply until
you have properly connected all the other cables.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety.

Connecting the power supply unit to your set-top box

Before you insert the power supply unit into the wall AC outlet, connect the DC cord from the power supply
unit to the power socket labeled

Connecting equipment to the wall AC outlets

Connect your set-top box's power supply unit, and the plugs on the power cords from your TV, VCR, and any
other equipment, into wall AC outlets. If these outlets have switches, switch them ON.

Turning your set-top box on and off

After you have connected your set-top box's power supply unit to the wall AC outlet (and switched this outlet
ON, if it has a switch), the Power light should light up red, to show that your set-top box is in standby. Press
the Power button on your set-top box's remote control to turn it on. The Power light should light up green,
to show that your set-top box is on.
To turn your set-top box on or off at any time, press the Power button on the remote control.
Never turn off your set-top box by simply disconnecting it from the power supply. If you need to disconnect
your set-top box, first turn it off by pressing the Power button on the remote control.
Power Saving: To save power and money, and to reduce greenhouse gas emissions, turn off
your set-top box, using the

Lightning storms

Disconnect your set-top box's power cord during lightning storms. A lightning storm may affect your set-top
box, if it is on during the storm. It may appear that it has stopped working, but you can easily restore its
operation as follows:
Unplug your set-top box' s power supply unit from the wall AC outlet. Then plug this power supply unit in
again at the wall AC outlet (and, if there is a switch by this outlet, switch it to its ON position).
WARNINGS
on your set-top box's rear panel.
POWER
Power button on the remote control, when it is not in use.
CI2516 USER GUIDE
To turn your set-top box on, press the
Power button on the remote control
Lights up green when
your set-top is on.
10