Removing The Operation Panel - Epson Stylus Color 660 Service Manual

EPSON Stylus Color 440/640/740

4.2.3 Removing the Operation Panel

The panel board equipped with each printer is as follows:
- Stylus Color 440/640: C206PNL
- Stylus Color 740: C209PNL
1. Remove the housing. (Refer to Section 4.2.1.)
2. Remove two screws (No.1) securing the operation panel and
disconnect the operation panel from the printer mechanism.
3. Remove one screw (No.1) and detach the left panel housing.
4. Remove screws (No.3) securing the panel board assembly and
remove C206/209 PNL board from the panel assembly.
5. Disconnect the FFC from the connector on the C206/209 PNL
board.
C A U T I O N
Removing the operation panel also separates the
stacker assembly, since the operation panel is
attached to the stacker assembly.
Chapter 4 Disassembly and Assembly
( N o . 3 )
( N o . 1 )
L e f t P a n e l H o u s i n g
Figure 4-5. Removing the Operation Panel
Revision A
P a n e l S h i e l d P l a t e
P a n e l B o a r d A s s e m b l y
( N o . 1 )
P a n e l A s s e m b l y
S t a c k e r A s s e m b l y
108