Epson Stylus Color 660 Service Manual page 149

EPSON Stylus Color 440/640/740
Make sure that this
protrusion is in the
U ditch of the priht head
side.
Chapter 4 Disassembly and Assembly
This part should
be touching the
CR shaft receiver.
Carriage Assembly
Print Head
Nozzle Selector;
Stylus Color 440: 1 piece
Stylus Color 640: 2 pieces
Figure 4-7. Installing the Printhead
Make sure that the protrusion
of the carriage is aligned with
the hole of the earth board.
Nozzle Selector has been enclosed into head.
Stylus Color 740
Revision A
111