Charging The Spare Battery On The Base Station - VeriFone VX 680 Installation Manual

T S
ERMINAL ETUP

Charging the Spare Battery on the Base Station

Charging the
Spare Battery on
the Base Station
36
VX 680 I
NSTALLATION
1
Insert the USB dongle into the USB port located at the back of the Base
Station.
Figure 27 Inserting External Dongle Into USB Port
2
After inserting the external dongle into the USB port, place the VX 680
terminal onto the Base Station (see
3
Connect the peripheral to the external dongle.
The full-feature Base Station can charge the VX 680 terminal while charging an
extra battery pack.
1
Connect the Base Station to a power source (see
Station)
2
Place the spare battery pack onto the Base Station as shown in
Figure 28 Putting Spare Battery Pack Into the Base Station
G
UIDE
Powering Up the Base
Powering Up the Base
Station).
Figure 28.