Placing The Terminal Onto The Base Station; Attaching The Usb Dongles To The Base Station - VeriFone VX 680 Installation Manual

Placing the
Terminal Onto
the Base Station
NOTE
WARNING
Attaching the
USB Dongles to
the Base Station
NOTE
The VX 680 terminal can be placed on the Base Station when not in use for
continuous charging of its battery. External peripherals can also be attached to the
terminal via USB dongles while it is on the Base Station (see
Dongles to the Base Station).
Figure 26 Placing the VX 680 terminal onto the Base Station
The full-feature Base Station can also charge a spare battery while it charges the
battery attached to the terminal (see
Station).
To protect against possible damage caused by lightning strikes and electrical
surges, consider installing a power surge protector.
Do not plug the power pack into an outdoor outlet or operate the terminal
outdoors.
Disconnecting the power during a transaction may cause transaction data files
not yet stored in terminal memory to be lost.
While the VX 680 terminal is resting on the Base Station, you can drive external
peripherals through the use of USB dongles. Only one Modem Dongle and one
Serial Dongle can be connected to the Base Station. A second Modem Dongle or
a second Serial Dongle will be ignored by the terminal.
The full-feature Base Station has USB ports for two external dongles. The
standard Base Station does not have USB ports.

Placing the Terminal Onto the Base Station

Charging the Spare Battery on the Base
VX 680 I
T S
ERMINAL ETUP
Attaching the USB
G
NSTALLATION UIDE
35