CAUTION
Establishing
Telephone Line
Connections
WARNING
The Modem Dongle and Serial Dongle are intended for use with the VX 680
terminal and Base Station only. They should not be installed or used with any
equipment other than the VX 680 terminal or Base Station.
To connect a telephone line:
1
Connect one end of the telephone cable to the USB Modem Dongle.
2
Connect the USB Modem Dongle to the terminal using the mini-HDMI
Connector (VPN CBL268-003-01-A).
3
Route the other end of the telephone cable directly to a telephone wall jack.
To reduce the risk of fire, use only No. 26 AWG or larger UL Listed or CSA
Certified Telecommunication Line Cable.
USB HOST CABLE
Figure 7
VX 680 USB Modem Dongle Connection
Establishing Telephone Line Connections
USB MODEM DONGLE
VX 680 I
T
S
ERMINAL
ETUP
19
G
NSTALLATION
UIDE