Connecting The Terminal Power Pack - VeriFone VX 680 Installation Manual

Connecting the
Terminal Power
Pack
CAUTION
To Connect the
Terminal Power Pack
WARNING
NOTE
When you have finished installing the smart battery, you are ready to connect the
VX 680 terminal to the provided power source for initial charging.
Using an incorrectly rated power supply may damage the terminal or cause it not
to work as specified. Before troubleshooting, ensure that the power supply being
used to power the terminal matches the requirements specified on the bottom of
the terminal. (See Chapter 3,Specifications
specifications.) Obtain the appropriately rated power supply before continuing
with troubleshooting.
The VX 680 unit comes with a universal input power pack capable of operating
from voltages of 100VAC to 240VAC.
1
Insert the round barrel connector into the power port in the connector, as
shown in Figure 22.
Figure 22 VX 680 Power Pack Connection
2
Insert the AC power cable into the power pack.
3
Plug the AC power cable into a wall outlet or powered surge protector.
Do not plug the power pack into an outdoor outlet or operate the terminal
outdoors.
During a transaction, disconnecting the power by removing the battery or
unplugging the terminal from a wall power while at very low battery charge may
cause transaction data files not yet stored in the terminal memory to be lost.
To protect against possible damage caused by lightning strikes and electrical
surges, consider installing a power surge protector.
When the terminal has power, the terminal lights are activated and the LED
indicator remains lit.

Connecting the Terminal Power Pack

for detailed power supply
VX 680 I
NSTALLATION
T S
ERMINAL ETUP
31
G
UIDE